ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('AP040_ASM','2022-10-27T11:25:19',('hofmann'),(''),
'CREO PARAMETRIC BY PTC INC, 2020154','CREO PARAMETRIC BY PTC INC, 2020154','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2=DIRECTION('',(-1.E0,0.E0,0.E0));
#3=DIRECTION('',(0.E0,1.E0,0.E0));
#4=AXIS2_PLACEMENT_3D('',#1,#2,#3);
#6=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#7=DIRECTION('',(1.E0,0.E0,0.E0));
#8=DIRECTION('',(0.E0,1.E0,0.E0));
#9=AXIS2_PLACEMENT_3D('',#6,#7,#8);
#11=CARTESIAN_POINT('',(0.E0,0.E0,-3.25E1));
#12=DIRECTION('',(-1.E0,0.E0,0.E0));
#13=DIRECTION('',(0.E0,-1.E0,0.E0));
#14=AXIS2_PLACEMENT_3D('',#11,#12,#13);
#16=CARTESIAN_POINT('',(0.E0,0.E0,-3.25E1));
#17=DIRECTION('',(-1.E0,0.E0,0.E0));
#18=DIRECTION('',(0.E0,1.E0,0.E0));
#19=AXIS2_PLACEMENT_3D('',#16,#17,#18);
#21=CARTESIAN_POINT('',(0.E0,3.25E1,0.E0));
#22=DIRECTION('',(-1.E0,0.E0,0.E0));
#23=DIRECTION('',(0.E0,-1.E0,0.E0));
#24=AXIS2_PLACEMENT_3D('',#21,#22,#23);
#26=CARTESIAN_POINT('',(0.E0,3.25E1,0.E0));
#27=DIRECTION('',(-1.E0,0.E0,0.E0));
#28=DIRECTION('',(0.E0,1.E0,0.E0));
#29=AXIS2_PLACEMENT_3D('',#26,#27,#28);
#31=CARTESIAN_POINT('',(0.E0,0.E0,3.25E1));
#32=DIRECTION('',(-1.E0,0.E0,0.E0));
#33=DIRECTION('',(0.E0,-1.E0,0.E0));
#34=AXIS2_PLACEMENT_3D('',#31,#32,#33);
#36=CARTESIAN_POINT('',(0.E0,0.E0,3.25E1));
#37=DIRECTION('',(-1.E0,0.E0,0.E0));
#38=DIRECTION('',(0.E0,1.E0,0.E0));
#39=AXIS2_PLACEMENT_3D('',#36,#37,#38);
#41=CARTESIAN_POINT('',(0.E0,-3.25E1,0.E0));
#42=DIRECTION('',(-1.E0,0.E0,0.E0));
#43=DIRECTION('',(0.E0,-1.E0,0.E0));
#44=AXIS2_PLACEMENT_3D('',#41,#42,#43);
#46=CARTESIAN_POINT('',(0.E0,-3.25E1,0.E0));
#47=DIRECTION('',(-1.E0,0.E0,0.E0));
#48=DIRECTION('',(0.E0,1.E0,0.E0));
#49=AXIS2_PLACEMENT_3D('',#46,#47,#48);
#51=DIRECTION('',(-1.E0,0.E0,0.E0));
#52=VECTOR('',#51,3.E0);
#53=CARTESIAN_POINT('',(3.E0,4.75E1,0.E0));
#54=LINE('',#53,#52);
#55=DIRECTION('',(-1.E0,0.E0,0.E0));
#56=VECTOR('',#55,3.E0);
#57=CARTESIAN_POINT('',(3.E0,-4.75E1,0.E0));
#58=LINE('',#57,#56);
#59=CARTESIAN_POINT('',(3.E0,0.E0,0.E0));
#60=DIRECTION('',(-1.E0,0.E0,0.E0));
#61=DIRECTION('',(0.E0,1.E0,0.E0));
#62=AXIS2_PLACEMENT_3D('',#59,#60,#61);
#64=CARTESIAN_POINT('',(3.E0,0.E0,0.E0));
#65=DIRECTION('',(1.E0,0.E0,0.E0));
#66=DIRECTION('',(0.E0,1.E0,0.E0));
#67=AXIS2_PLACEMENT_3D('',#64,#65,#66);
#69=CARTESIAN_POINT('',(3.E0,0.E0,0.E0));
#70=DIRECTION('',(1.E0,0.E0,0.E0));
#71=DIRECTION('',(0.E0,1.E0,0.E0));
#72=AXIS2_PLACEMENT_3D('',#69,#70,#71);
#74=CARTESIAN_POINT('',(3.E0,0.E0,0.E0));
#75=DIRECTION('',(-1.E0,0.E0,0.E0));
#76=DIRECTION('',(0.E0,1.E0,0.E0));
#77=AXIS2_PLACEMENT_3D('',#74,#75,#76);
#79=CARTESIAN_POINT('',(8.E0,0.E0,0.E0));
#80=DIRECTION('',(1.E0,0.E0,0.E0));
#81=DIRECTION('',(0.E0,1.E0,0.E0));
#82=AXIS2_PLACEMENT_3D('',#79,#80,#81);
#84=DIRECTION('',(-1.E0,0.E0,0.E0));
#85=VECTOR('',#84,5.E0);
#86=CARTESIAN_POINT('',(8.E0,4.5E1,0.E0));
#87=LINE('',#86,#85);
#88=DIRECTION('',(-1.E0,0.E0,0.E0));
#89=VECTOR('',#88,5.E0);
#90=CARTESIAN_POINT('',(8.E0,-4.5E1,0.E0));
#91=LINE('',#90,#89);
#92=CARTESIAN_POINT('',(8.E0,0.E0,0.E0));
#93=DIRECTION('',(-1.E0,0.E0,0.E0));
#94=DIRECTION('',(0.E0,1.E0,0.E0));
#95=AXIS2_PLACEMENT_3D('',#92,#93,#94);
#97=CARTESIAN_POINT('',(8.E0,0.E0,-3.25E1));
#98=DIRECTION('',(-1.E0,0.E0,0.E0));
#99=DIRECTION('',(0.E0,-1.E0,0.E0));
#100=AXIS2_PLACEMENT_3D('',#97,#98,#99);
#102=CARTESIAN_POINT('',(8.E0,0.E0,-3.25E1));
#103=DIRECTION('',(-1.E0,0.E0,0.E0));
#104=DIRECTION('',(0.E0,1.E0,0.E0));
#105=AXIS2_PLACEMENT_3D('',#102,#103,#104);
#107=CARTESIAN_POINT('',(8.E0,3.25E1,0.E0));
#108=DIRECTION('',(-1.E0,0.E0,0.E0));
#109=DIRECTION('',(0.E0,-1.E0,0.E0));
#110=AXIS2_PLACEMENT_3D('',#107,#108,#109);
#112=CARTESIAN_POINT('',(8.E0,3.25E1,0.E0));
#113=DIRECTION('',(-1.E0,0.E0,0.E0));
#114=DIRECTION('',(0.E0,1.E0,0.E0));
#115=AXIS2_PLACEMENT_3D('',#112,#113,#114);
#117=CARTESIAN_POINT('',(8.E0,0.E0,3.25E1));
#118=DIRECTION('',(-1.E0,0.E0,0.E0));
#119=DIRECTION('',(0.E0,-1.E0,0.E0));
#120=AXIS2_PLACEMENT_3D('',#117,#118,#119);
#122=CARTESIAN_POINT('',(8.E0,0.E0,3.25E1));
#123=DIRECTION('',(-1.E0,0.E0,0.E0));
#124=DIRECTION('',(0.E0,1.E0,0.E0));
#125=AXIS2_PLACEMENT_3D('',#122,#123,#124);
#127=CARTESIAN_POINT('',(8.E0,-3.25E1,0.E0));
#128=DIRECTION('',(-1.E0,0.E0,0.E0));
#129=DIRECTION('',(0.E0,-1.E0,0.E0));
#130=AXIS2_PLACEMENT_3D('',#127,#128,#129);
#132=CARTESIAN_POINT('',(8.E0,-3.25E1,0.E0));
#133=DIRECTION('',(-1.E0,0.E0,0.E0));
#134=DIRECTION('',(0.E0,1.E0,0.E0));
#135=AXIS2_PLACEMENT_3D('',#132,#133,#134);
#137=DIRECTION('',(-1.E0,0.E0,0.E0));
#138=VECTOR('',#137,8.E0);
#139=CARTESIAN_POINT('',(8.E0,-4.E0,-3.25E1));
#140=LINE('',#139,#138);
#141=DIRECTION('',(-1.E0,0.E0,0.E0));
#142=VECTOR('',#141,8.E0);
#143=CARTESIAN_POINT('',(8.E0,4.E0,-3.25E1));
#144=LINE('',#143,#142);
#145=DIRECTION('',(-1.E0,0.E0,0.E0));
#146=VECTOR('',#145,8.E0);
#147=CARTESIAN_POINT('',(8.E0,2.85E1,0.E0));
#148=LINE('',#147,#146);
#149=DIRECTION('',(-1.E0,0.E0,0.E0));
#150=VECTOR('',#149,8.E0);
#151=CARTESIAN_POINT('',(8.E0,3.65E1,0.E0));
#152=LINE('',#151,#150);
#153=DIRECTION('',(-1.E0,0.E0,0.E0));
#154=VECTOR('',#153,8.E0);
#155=CARTESIAN_POINT('',(8.E0,-4.E0,3.25E1));
#156=LINE('',#155,#154);
#157=DIRECTION('',(-1.E0,0.E0,0.E0));
#158=VECTOR('',#157,8.E0);
#159=CARTESIAN_POINT('',(8.E0,4.E0,3.25E1));
#160=LINE('',#159,#158);
#161=DIRECTION('',(-1.E0,0.E0,0.E0));
#162=VECTOR('',#161,8.E0);
#163=CARTESIAN_POINT('',(8.E0,-3.65E1,0.E0));
#164=LINE('',#163,#162);
#165=DIRECTION('',(-1.E0,0.E0,0.E0));
#166=VECTOR('',#165,8.E0);
#167=CARTESIAN_POINT('',(8.E0,-2.85E1,0.E0));
#168=LINE('',#167,#166);
#169=CARTESIAN_POINT('',(8.E0,4.5E1,0.E0));
#170=CARTESIAN_POINT('',(3.E0,4.5E1,0.E0));
#171=VERTEX_POINT('',#169);
#172=VERTEX_POINT('',#170);
#173=CARTESIAN_POINT('',(3.E0,4.75E1,0.E0));
#174=CARTESIAN_POINT('',(0.E0,4.75E1,0.E0));
#175=VERTEX_POINT('',#173);
#176=VERTEX_POINT('',#174);
#177=CARTESIAN_POINT('',(8.E0,-4.5E1,0.E0));
#178=CARTESIAN_POINT('',(3.E0,-4.5E1,0.E0));
#179=VERTEX_POINT('',#177);
#180=VERTEX_POINT('',#178);
#181=CARTESIAN_POINT('',(3.E0,-4.75E1,0.E0));
#182=CARTESIAN_POINT('',(0.E0,-4.75E1,0.E0));
#183=VERTEX_POINT('',#181);
#184=VERTEX_POINT('',#182);
#185=CARTESIAN_POINT('',(0.E0,-4.E0,-3.25E1));
#186=CARTESIAN_POINT('',(0.E0,4.E0,-3.25E1));
#187=VERTEX_POINT('',#185);
#188=VERTEX_POINT('',#186);
#189=CARTESIAN_POINT('',(8.E0,-4.E0,-3.25E1));
#190=CARTESIAN_POINT('',(8.E0,4.E0,-3.25E1));
#191=VERTEX_POINT('',#189);
#192=VERTEX_POINT('',#190);
#193=CARTESIAN_POINT('',(0.E0,2.85E1,0.E0));
#194=CARTESIAN_POINT('',(0.E0,3.65E1,0.E0));
#195=VERTEX_POINT('',#193);
#196=VERTEX_POINT('',#194);
#197=CARTESIAN_POINT('',(8.E0,2.85E1,0.E0));
#198=CARTESIAN_POINT('',(8.E0,3.65E1,0.E0));
#199=VERTEX_POINT('',#197);
#200=VERTEX_POINT('',#198);
#201=CARTESIAN_POINT('',(0.E0,-4.E0,3.25E1));
#202=CARTESIAN_POINT('',(0.E0,4.E0,3.25E1));
#203=VERTEX_POINT('',#201);
#204=VERTEX_POINT('',#202);
#205=CARTESIAN_POINT('',(8.E0,-4.E0,3.25E1));
#206=CARTESIAN_POINT('',(8.E0,4.E0,3.25E1));
#207=VERTEX_POINT('',#205);
#208=VERTEX_POINT('',#206);
#209=CARTESIAN_POINT('',(0.E0,-3.65E1,0.E0));
#210=CARTESIAN_POINT('',(0.E0,-2.85E1,0.E0));
#211=VERTEX_POINT('',#209);
#212=VERTEX_POINT('',#210);
#213=CARTESIAN_POINT('',(8.E0,-3.65E1,0.E0));
#214=CARTESIAN_POINT('',(8.E0,-2.85E1,0.E0));
#215=VERTEX_POINT('',#213);
#216=VERTEX_POINT('',#214);
#217=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#218=DIRECTION('',(1.E0,0.E0,0.E0));
#219=DIRECTION('',(0.E0,-1.E0,0.E0));
#220=AXIS2_PLACEMENT_3D('',#217,#218,#219);
#221=PLANE('',#220);
#223=ORIENTED_EDGE('',*,*,#222,.F.);
#225=ORIENTED_EDGE('',*,*,#224,.T.);
#226=EDGE_LOOP('',(#223,#225));
#227=FACE_OUTER_BOUND('',#226,.F.);
#229=ORIENTED_EDGE('',*,*,#228,.T.);
#231=ORIENTED_EDGE('',*,*,#230,.T.);
#232=EDGE_LOOP('',(#229,#231));
#233=FACE_BOUND('',#232,.F.);
#235=ORIENTED_EDGE('',*,*,#234,.T.);
#237=ORIENTED_EDGE('',*,*,#236,.T.);
#238=EDGE_LOOP('',(#235,#237));
#239=FACE_BOUND('',#238,.F.);
#241=ORIENTED_EDGE('',*,*,#240,.T.);
#243=ORIENTED_EDGE('',*,*,#242,.T.);
#244=EDGE_LOOP('',(#241,#243));
#245=FACE_BOUND('',#244,.F.);
#247=ORIENTED_EDGE('',*,*,#246,.T.);
#249=ORIENTED_EDGE('',*,*,#248,.T.);
#250=EDGE_LOOP('',(#247,#249));
#251=FACE_BOUND('',#250,.F.);
#252=ADVANCED_FACE('',(#227,#233,#239,#245,#251),#221,.F.);
#253=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#254=DIRECTION('',(1.E0,0.E0,0.E0));
#255=DIRECTION('',(0.E0,-1.E0,0.E0));
#256=AXIS2_PLACEMENT_3D('',#253,#254,#255);
#257=CYLINDRICAL_SURFACE('',#256,4.75E1);
#259=ORIENTED_EDGE('',*,*,#258,.T.);
#260=ORIENTED_EDGE('',*,*,#222,.T.);
#262=ORIENTED_EDGE('',*,*,#261,.F.);
#264=ORIENTED_EDGE('',*,*,#263,.F.);
#265=EDGE_LOOP('',(#259,#260,#262,#264));
#266=FACE_OUTER_BOUND('',#265,.F.);
#267=ADVANCED_FACE('',(#266),#257,.T.);
#268=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#269=DIRECTION('',(1.E0,0.E0,0.E0));
#270=DIRECTION('',(0.E0,-1.E0,0.E0));
#271=AXIS2_PLACEMENT_3D('',#268,#269,#270);
#272=CYLINDRICAL_SURFACE('',#271,4.75E1);
#273=ORIENTED_EDGE('',*,*,#258,.F.);
#275=ORIENTED_EDGE('',*,*,#274,.T.);
#276=ORIENTED_EDGE('',*,*,#261,.T.);
#277=ORIENTED_EDGE('',*,*,#224,.F.);
#278=EDGE_LOOP('',(#273,#275,#276,#277));
#279=FACE_OUTER_BOUND('',#278,.F.);
#280=ADVANCED_FACE('',(#279),#272,.T.);
#281=CARTESIAN_POINT('',(3.E0,0.E0,0.E0));
#282=DIRECTION('',(1.E0,0.E0,0.E0));
#283=DIRECTION('',(0.E0,-1.E0,0.E0));
#284=AXIS2_PLACEMENT_3D('',#281,#282,#283);
#285=PLANE('',#284);
#286=ORIENTED_EDGE('',*,*,#263,.T.);
#287=ORIENTED_EDGE('',*,*,#274,.F.);
#288=EDGE_LOOP('',(#286,#287));
#289=FACE_OUTER_BOUND('',#288,.F.);
#291=ORIENTED_EDGE('',*,*,#290,.T.);
#293=ORIENTED_EDGE('',*,*,#292,.F.);
#294=EDGE_LOOP('',(#291,#293));
#295=FACE_BOUND('',#294,.F.);
#296=ADVANCED_FACE('',(#289,#295),#285,.T.);
#297=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#298=DIRECTION('',(1.E0,0.E0,0.E0));
#299=DIRECTION('',(0.E0,-1.E0,0.E0));
#300=AXIS2_PLACEMENT_3D('',#297,#298,#299);
#301=CYLINDRICAL_SURFACE('',#300,4.5E1);
#303=ORIENTED_EDGE('',*,*,#302,.F.);
#305=ORIENTED_EDGE('',*,*,#304,.T.);
#307=ORIENTED_EDGE('',*,*,#306,.T.);
#308=ORIENTED_EDGE('',*,*,#290,.F.);
#309=EDGE_LOOP('',(#303,#305,#307,#308));
#310=FACE_OUTER_BOUND('',#309,.F.);
#311=ADVANCED_FACE('',(#310),#301,.T.);
#312=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#313=DIRECTION('',(1.E0,0.E0,0.E0));
#314=DIRECTION('',(0.E0,-1.E0,0.E0));
#315=AXIS2_PLACEMENT_3D('',#312,#313,#314);
#316=CYLINDRICAL_SURFACE('',#315,4.5E1);
#317=ORIENTED_EDGE('',*,*,#302,.T.);
#318=ORIENTED_EDGE('',*,*,#292,.T.);
#319=ORIENTED_EDGE('',*,*,#306,.F.);
#321=ORIENTED_EDGE('',*,*,#320,.F.);
#322=EDGE_LOOP('',(#317,#318,#319,#321));
#323=FACE_OUTER_BOUND('',#322,.F.);
#324=ADVANCED_FACE('',(#323),#316,.T.);
#325=CARTESIAN_POINT('',(8.E0,0.E0,0.E0));
#326=DIRECTION('',(1.E0,0.E0,0.E0));
#327=DIRECTION('',(0.E0,-1.E0,0.E0));
#328=AXIS2_PLACEMENT_3D('',#325,#326,#327);
#329=PLANE('',#328);
#330=ORIENTED_EDGE('',*,*,#320,.T.);
#331=ORIENTED_EDGE('',*,*,#304,.F.);
#332=EDGE_LOOP('',(#330,#331));
#333=FACE_OUTER_BOUND('',#332,.F.);
#335=ORIENTED_EDGE('',*,*,#334,.F.);
#337=ORIENTED_EDGE('',*,*,#336,.F.);
#338=EDGE_LOOP('',(#335,#337));
#339=FACE_BOUND('',#338,.F.);
#341=ORIENTED_EDGE('',*,*,#340,.F.);
#343=ORIENTED_EDGE('',*,*,#342,.F.);
#344=EDGE_LOOP('',(#341,#343));
#345=FACE_BOUND('',#344,.F.);
#347=ORIENTED_EDGE('',*,*,#346,.F.);
#349=ORIENTED_EDGE('',*,*,#348,.F.);
#350=EDGE_LOOP('',(#347,#349));
#351=FACE_BOUND('',#350,.F.);
#353=ORIENTED_EDGE('',*,*,#352,.F.);
#355=ORIENTED_EDGE('',*,*,#354,.F.);
#356=EDGE_LOOP('',(#353,#355));
#357=FACE_BOUND('',#356,.F.);
#358=ADVANCED_FACE('',(#333,#339,#345,#351,#357),#329,.T.);
#359=CARTESIAN_POINT('',(8.E0,0.E0,-3.25E1));
#360=DIRECTION('',(-1.E0,0.E0,0.E0));
#361=DIRECTION('',(0.E0,-1.E0,0.E0));
#362=AXIS2_PLACEMENT_3D('',#359,#360,#361);
#363=CYLINDRICAL_SURFACE('',#362,4.E0);
#364=ORIENTED_EDGE('',*,*,#228,.F.);
#366=ORIENTED_EDGE('',*,*,#365,.F.);
#367=ORIENTED_EDGE('',*,*,#334,.T.);
#369=ORIENTED_EDGE('',*,*,#368,.T.);
#370=EDGE_LOOP('',(#364,#366,#367,#369));
#371=FACE_OUTER_BOUND('',#370,.F.);
#372=ADVANCED_FACE('',(#371),#363,.F.);
#373=CARTESIAN_POINT('',(8.E0,0.E0,-3.25E1));
#374=DIRECTION('',(-1.E0,0.E0,0.E0));
#375=DIRECTION('',(0.E0,-1.E0,0.E0));
#376=AXIS2_PLACEMENT_3D('',#373,#374,#375);
#377=CYLINDRICAL_SURFACE('',#376,4.E0);
#378=ORIENTED_EDGE('',*,*,#230,.F.);
#379=ORIENTED_EDGE('',*,*,#368,.F.);
#380=ORIENTED_EDGE('',*,*,#336,.T.);
#381=ORIENTED_EDGE('',*,*,#365,.T.);
#382=EDGE_LOOP('',(#378,#379,#380,#381));
#383=FACE_OUTER_BOUND('',#382,.F.);
#384=ADVANCED_FACE('',(#383),#377,.F.);
#385=CARTESIAN_POINT('',(8.E0,3.25E1,0.E0));
#386=DIRECTION('',(-1.E0,0.E0,0.E0));
#387=DIRECTION('',(0.E0,-1.E0,0.E0));
#388=AXIS2_PLACEMENT_3D('',#385,#386,#387);
#389=CYLINDRICAL_SURFACE('',#388,4.E0);
#390=ORIENTED_EDGE('',*,*,#234,.F.);
#392=ORIENTED_EDGE('',*,*,#391,.F.);
#393=ORIENTED_EDGE('',*,*,#340,.T.);
#395=ORIENTED_EDGE('',*,*,#394,.T.);
#396=EDGE_LOOP('',(#390,#392,#393,#395));
#397=FACE_OUTER_BOUND('',#396,.F.);
#398=ADVANCED_FACE('',(#397),#389,.F.);
#399=CARTESIAN_POINT('',(8.E0,3.25E1,0.E0));
#400=DIRECTION('',(-1.E0,0.E0,0.E0));
#401=DIRECTION('',(0.E0,-1.E0,0.E0));
#402=AXIS2_PLACEMENT_3D('',#399,#400,#401);
#403=CYLINDRICAL_SURFACE('',#402,4.E0);
#404=ORIENTED_EDGE('',*,*,#236,.F.);
#405=ORIENTED_EDGE('',*,*,#394,.F.);
#406=ORIENTED_EDGE('',*,*,#342,.T.);
#407=ORIENTED_EDGE('',*,*,#391,.T.);
#408=EDGE_LOOP('',(#404,#405,#406,#407));
#409=FACE_OUTER_BOUND('',#408,.F.);
#410=ADVANCED_FACE('',(#409),#403,.F.);
#411=CARTESIAN_POINT('',(8.E0,0.E0,3.25E1));
#412=DIRECTION('',(-1.E0,0.E0,0.E0));
#413=DIRECTION('',(0.E0,-1.E0,0.E0));
#414=AXIS2_PLACEMENT_3D('',#411,#412,#413);
#415=CYLINDRICAL_SURFACE('',#414,4.E0);
#416=ORIENTED_EDGE('',*,*,#240,.F.);
#418=ORIENTED_EDGE('',*,*,#417,.F.);
#419=ORIENTED_EDGE('',*,*,#346,.T.);
#421=ORIENTED_EDGE('',*,*,#420,.T.);
#422=EDGE_LOOP('',(#416,#418,#419,#421));
#423=FACE_OUTER_BOUND('',#422,.F.);
#424=ADVANCED_FACE('',(#423),#415,.F.);
#425=CARTESIAN_POINT('',(8.E0,0.E0,3.25E1));
#426=DIRECTION('',(-1.E0,0.E0,0.E0));
#427=DIRECTION('',(0.E0,-1.E0,0.E0));
#428=AXIS2_PLACEMENT_3D('',#425,#426,#427);
#429=CYLINDRICAL_SURFACE('',#428,4.E0);
#430=ORIENTED_EDGE('',*,*,#242,.F.);
#431=ORIENTED_EDGE('',*,*,#420,.F.);
#432=ORIENTED_EDGE('',*,*,#348,.T.);
#433=ORIENTED_EDGE('',*,*,#417,.T.);
#434=EDGE_LOOP('',(#430,#431,#432,#433));
#435=FACE_OUTER_BOUND('',#434,.F.);
#436=ADVANCED_FACE('',(#435),#429,.F.);
#437=CARTESIAN_POINT('',(8.E0,-3.25E1,0.E0));
#438=DIRECTION('',(-1.E0,0.E0,0.E0));
#439=DIRECTION('',(0.E0,-1.E0,0.E0));
#440=AXIS2_PLACEMENT_3D('',#437,#438,#439);
#441=CYLINDRICAL_SURFACE('',#440,4.E0);
#442=ORIENTED_EDGE('',*,*,#246,.F.);
#444=ORIENTED_EDGE('',*,*,#443,.F.);
#445=ORIENTED_EDGE('',*,*,#352,.T.);
#447=ORIENTED_EDGE('',*,*,#446,.T.);
#448=EDGE_LOOP('',(#442,#444,#445,#447));
#449=FACE_OUTER_BOUND('',#448,.F.);
#450=ADVANCED_FACE('',(#449),#441,.F.);
#451=CARTESIAN_POINT('',(8.E0,-3.25E1,0.E0));
#452=DIRECTION('',(-1.E0,0.E0,0.E0));
#453=DIRECTION('',(0.E0,-1.E0,0.E0));
#454=AXIS2_PLACEMENT_3D('',#451,#452,#453);
#455=CYLINDRICAL_SURFACE('',#454,4.E0);
#456=ORIENTED_EDGE('',*,*,#248,.F.);
#457=ORIENTED_EDGE('',*,*,#446,.F.);
#458=ORIENTED_EDGE('',*,*,#354,.T.);
#459=ORIENTED_EDGE('',*,*,#443,.T.);
#460=EDGE_LOOP('',(#456,#457,#458,#459));
#461=FACE_OUTER_BOUND('',#460,.F.);
#462=ADVANCED_FACE('',(#461),#455,.F.);
#466=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#468=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#467);
#469=(CONVERSION_BASED_UNIT('DEGREE',#468)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#471=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#465,'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#472=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#471))GLOBAL_UNIT_ASSIGNED_CONTEXT((#465,#469,#470))REPRESENTATION_CONTEXT
('ID1','3'));
#473=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#474=DIRECTION('',(0.E0,0.E0,1.E0));
#475=DIRECTION('',(1.E0,0.E0,0.E0));
#478=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#479=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#478);
#480=DESIGN_CONTEXT('',#478,'design');
#481=MECHANICAL_CONTEXT('',#478,'mechanical');
#482=PRODUCT('AP040-PLATTE','AP040-PLATTE','NOT SPECIFIED',(#481));
#483=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('7','LAST_VERSION',#482,
.MADE.);
#492=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#493=DIRECTION('',(0.E0,0.E0,1.E0));
#494=DIRECTION('',(1.E0,0.E0,0.E0));
#495=AXIS2_PLACEMENT_3D('',#492,#493,#494);
#496=ITEM_DEFINED_TRANSFORMATION('','',#476,#495);
#497=(REPRESENTATION_RELATIONSHIP('','',#477,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#496)SHAPE_REPRESENTATION_RELATIONSHIP());
#498=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#497,#491);
#499=CARTESIAN_POINT('',(6.917062159806E-5,0.E0,0.E0));
#500=DIRECTION('',(-1.E0,0.E0,0.E0));
#501=DIRECTION('',(0.E0,1.E0,0.E0));
#502=AXIS2_PLACEMENT_3D('',#499,#500,#501);
#504=CARTESIAN_POINT('',(6.917062159895E-5,0.E0,0.E0));
#505=DIRECTION('',(-1.E0,0.E0,0.E0));
#506=DIRECTION('',(0.E0,-1.E0,0.E0));
#507=AXIS2_PLACEMENT_3D('',#504,#505,#506);
#509=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#510=VECTOR('',#509,1.414213562373E0);
#511=CARTESIAN_POINT('',(5.265632043875E-5,2.999947318331E0,
-2.164592829405E-8));
#512=LINE('',#511,#510);
#513=DIRECTION('',(7.071067811865E-1,-7.071067811865E-1,0.E0));
#514=VECTOR('',#513,1.414213562373E0);
#515=CARTESIAN_POINT('',(5.265632043801E-5,-2.999947318331E0,
2.164592883769E-8));
#516=LINE('',#515,#514);
#517=CARTESIAN_POINT('',(3.899997359668E1,0.E0,0.E0));
#518=DIRECTION('',(1.E0,0.E0,0.E0));
#519=DIRECTION('',(0.E0,1.E0,0.E0));
#520=AXIS2_PLACEMENT_3D('',#517,#518,#519);
#522=CARTESIAN_POINT('',(1.000026403320E0,0.E0,0.E0));
#523=DIRECTION('',(-1.E0,0.E0,0.E0));
#524=DIRECTION('',(0.E0,-1.E0,0.E0));
#525=AXIS2_PLACEMENT_3D('',#522,#523,#524);
#527=DIRECTION('',(1.E0,0.E0,0.E0));
#528=VECTOR('',#527,3.799989468736E1);
#529=CARTESIAN_POINT('',(1.000052656320E0,3.999947318331E0,-2.164592833325E-8));
#530=LINE('',#529,#528);
#531=DIRECTION('',(-7.071067811865E-1,7.071067811866E-1,0.E0));
#532=VECTOR('',#531,1.414213562373E0);
#533=CARTESIAN_POINT('',(3.999994734368E1,2.999947318331E0,-2.164592862710E-8));
#534=LINE('',#533,#532);
#535=CARTESIAN_POINT('',(3.999993082938E1,0.E0,0.E0));
#536=DIRECTION('',(1.E0,0.E0,0.E0));
#537=DIRECTION('',(0.E0,-1.E0,0.E0));
#538=AXIS2_PLACEMENT_3D('',#535,#536,#537);
#540=CARTESIAN_POINT('',(3.999993082938E1,0.E0,0.E0));
#541=DIRECTION('',(1.E0,0.E0,0.E0));
#542=DIRECTION('',(0.E0,1.E0,0.E0));
#543=AXIS2_PLACEMENT_3D('',#540,#541,#542);
#545=DIRECTION('',(-7.071067811865E-1,-7.071067811865E-1,0.E0));
#546=VECTOR('',#545,1.414213562373E0);
#547=CARTESIAN_POINT('',(3.999994734368E1,-2.999947318331E0,2.164592894872E-8));
#548=LINE('',#547,#546);
#549=CARTESIAN_POINT('',(3.899997359668E1,0.E0,0.E0));
#550=DIRECTION('',(1.E0,0.E0,0.E0));
#551=DIRECTION('',(0.E0,-1.E0,0.E0));
#552=AXIS2_PLACEMENT_3D('',#549,#550,#551);
#554=CARTESIAN_POINT('',(1.000026403320E0,0.E0,0.E0));
#555=DIRECTION('',(-1.E0,0.E0,0.E0));
#556=DIRECTION('',(0.E0,1.E0,0.E0));
#557=AXIS2_PLACEMENT_3D('',#554,#555,#556);
#559=DIRECTION('',(1.E0,0.E0,0.E0));
#560=VECTOR('',#559,3.799989468736E1);
#561=CARTESIAN_POINT('',(1.000052656320E0,-3.999947318331E0,2.164592928835E-8));
#562=LINE('',#561,#560);
#563=CARTESIAN_POINT('',(3.999993082938E1,-2.999911164155E0,0.E0));
#564=CARTESIAN_POINT('',(3.999993082938E1,2.999911164155E0,0.E0));
#565=VERTEX_POINT('',#563);
#566=VERTEX_POINT('',#564);
#567=CARTESIAN_POINT('',(3.899997359668E1,-4.E0,0.E0));
#568=CARTESIAN_POINT('',(3.899997359668E1,4.E0,0.E0));
#569=VERTEX_POINT('',#567);
#570=VERTEX_POINT('',#568);
#571=CARTESIAN_POINT('',(6.917062159806E-5,2.999911164155E0,0.E0));
#572=CARTESIAN_POINT('',(6.917062159806E-5,-2.999911164155E0,0.E0));
#573=VERTEX_POINT('',#571);
#574=VERTEX_POINT('',#572);
#575=CARTESIAN_POINT('',(1.000026403320E0,4.E0,0.E0));
#576=CARTESIAN_POINT('',(1.000026403320E0,-4.E0,0.E0));
#577=VERTEX_POINT('',#575);
#578=VERTEX_POINT('',#576);
#579=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#580=DIRECTION('',(1.E0,0.E0,0.E0));
#581=DIRECTION('',(0.E0,-1.E0,0.E0));
#582=AXIS2_PLACEMENT_3D('',#579,#580,#581);
#583=PLANE('',#582);
#585=ORIENTED_EDGE('',*,*,#584,.F.);
#587=ORIENTED_EDGE('',*,*,#586,.F.);
#588=EDGE_LOOP('',(#585,#587));
#589=FACE_OUTER_BOUND('',#588,.F.);
#590=ADVANCED_FACE('',(#589),#583,.F.);
#591=CARTESIAN_POINT('',(5.001017052084E-1,0.E0,0.E0));
#592=DIRECTION('',(1.E0,0.E0,0.E0));
#593=DIRECTION('',(0.E0,0.E0,-1.E0));
#594=AXIS2_PLACEMENT_3D('',#591,#592,#593);
#595=CONICAL_SURFACE('',#594,3.499917363224E0,4.499849114444E1);
#596=ORIENTED_EDGE('',*,*,#584,.T.);
#598=ORIENTED_EDGE('',*,*,#597,.T.);
#600=ORIENTED_EDGE('',*,*,#599,.F.);
#602=ORIENTED_EDGE('',*,*,#601,.F.);
#603=EDGE_LOOP('',(#596,#598,#600,#602));
#604=FACE_OUTER_BOUND('',#603,.F.);
#605=ADVANCED_FACE('',(#604),#595,.T.);
#606=CARTESIAN_POINT('',(5.001017052084E-1,0.E0,0.E0));
#607=DIRECTION('',(1.E0,0.E0,0.E0));
#608=DIRECTION('',(0.E0,0.E0,-1.E0));
#609=AXIS2_PLACEMENT_3D('',#606,#607,#608);
#610=CONICAL_SURFACE('',#609,3.499917363224E0,4.499849114444E1);
#611=ORIENTED_EDGE('',*,*,#586,.T.);
#612=ORIENTED_EDGE('',*,*,#601,.T.);
#614=ORIENTED_EDGE('',*,*,#613,.F.);
#615=ORIENTED_EDGE('',*,*,#597,.F.);
#616=EDGE_LOOP('',(#611,#612,#614,#615));
#617=FACE_OUTER_BOUND('',#616,.F.);
#618=ADVANCED_FACE('',(#617),#610,.T.);
#619=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#620=DIRECTION('',(1.E0,0.E0,0.E0));
#621=DIRECTION('',(0.E0,-1.E0,0.E0));
#622=AXIS2_PLACEMENT_3D('',#619,#620,#621);
#623=CYLINDRICAL_SURFACE('',#622,4.E0);
#625=ORIENTED_EDGE('',*,*,#624,.T.);
#627=ORIENTED_EDGE('',*,*,#626,.F.);
#628=ORIENTED_EDGE('',*,*,#613,.T.);
#630=ORIENTED_EDGE('',*,*,#629,.T.);
#631=EDGE_LOOP('',(#625,#627,#628,#630));
#632=FACE_OUTER_BOUND('',#631,.F.);
#633=ADVANCED_FACE('',(#632),#623,.T.);
#634=CARTESIAN_POINT('',(3.949989829479E1,0.E0,0.E0));
#635=DIRECTION('',(-1.E0,0.E0,0.E0));
#636=DIRECTION('',(0.E0,0.E0,-1.E0));
#637=AXIS2_PLACEMENT_3D('',#634,#635,#636);
#638=CONICAL_SURFACE('',#637,3.499917363224E0,4.499849114444E1);
#640=ORIENTED_EDGE('',*,*,#639,.T.);
#642=ORIENTED_EDGE('',*,*,#641,.T.);
#643=ORIENTED_EDGE('',*,*,#624,.F.);
#645=ORIENTED_EDGE('',*,*,#644,.F.);
#646=EDGE_LOOP('',(#640,#642,#643,#645));
#647=FACE_OUTER_BOUND('',#646,.F.);
#648=ADVANCED_FACE('',(#647),#638,.T.);
#649=CARTESIAN_POINT('',(4.E1,0.E0,0.E0));
#650=DIRECTION('',(1.E0,0.E0,0.E0));
#651=DIRECTION('',(0.E0,-1.E0,0.E0));
#652=AXIS2_PLACEMENT_3D('',#649,#650,#651);
#653=PLANE('',#652);
#655=ORIENTED_EDGE('',*,*,#654,.F.);
#656=ORIENTED_EDGE('',*,*,#639,.F.);
#657=EDGE_LOOP('',(#655,#656));
#658=FACE_OUTER_BOUND('',#657,.F.);
#659=ADVANCED_FACE('',(#658),#653,.T.);
#660=CARTESIAN_POINT('',(3.949989829479E1,0.E0,0.E0));
#661=DIRECTION('',(-1.E0,0.E0,0.E0));
#662=DIRECTION('',(0.E0,0.E0,-1.E0));
#663=AXIS2_PLACEMENT_3D('',#660,#661,#662);
#664=CONICAL_SURFACE('',#663,3.499917363224E0,4.499849114444E1);
#665=ORIENTED_EDGE('',*,*,#654,.T.);
#666=ORIENTED_EDGE('',*,*,#644,.T.);
#668=ORIENTED_EDGE('',*,*,#667,.F.);
#669=ORIENTED_EDGE('',*,*,#641,.F.);
#670=EDGE_LOOP('',(#665,#666,#668,#669));
#671=FACE_OUTER_BOUND('',#670,.F.);
#672=ADVANCED_FACE('',(#671),#664,.T.);
#673=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#674=DIRECTION('',(1.E0,0.E0,0.E0));
#675=DIRECTION('',(0.E0,-1.E0,0.E0));
#676=AXIS2_PLACEMENT_3D('',#673,#674,#675);
#677=CYLINDRICAL_SURFACE('',#676,4.E0);
#678=ORIENTED_EDGE('',*,*,#667,.T.);
#679=ORIENTED_EDGE('',*,*,#629,.F.);
#680=ORIENTED_EDGE('',*,*,#599,.T.);
#681=ORIENTED_EDGE('',*,*,#626,.T.);
#682=EDGE_LOOP('',(#678,#679,#680,#681));
#683=FACE_OUTER_BOUND('',#682,.F.);
#684=ADVANCED_FACE('',(#683),#677,.T.);
#688=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#690=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#689);
#691=(CONVERSION_BASED_UNIT('DEGREE',#690)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#693=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#687,'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#694=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#693))GLOBAL_UNIT_ASSIGNED_CONTEXT((#687,#691,#692))REPRESENTATION_CONTEXT
('ID2','3'));
#695=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#696=DIRECTION('',(0.E0,0.E0,1.E0));
#697=DIRECTION('',(1.E0,0.E0,0.E0));
#700=MECHANICAL_CONTEXT('',#478,'mechanical');
#701=PRODUCT('AP040-BOLZEN','AP040-BOLZEN','NOT SPECIFIED',(#700));
#702=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('16','LAST_VERSION',
#701,.MADE.);
#708=CARTESIAN_POINT('',(4.E1,0.E0,-3.25E1));
#709=DIRECTION('',(0.E0,0.E0,1.E0));
#710=DIRECTION('',(-1.E0,0.E0,0.E0));
#711=AXIS2_PLACEMENT_3D('',#708,#709,#710);
#712=ITEM_DEFINED_TRANSFORMATION('','',#698,#711);
#713=(REPRESENTATION_RELATIONSHIP('','',#699,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#712)SHAPE_REPRESENTATION_RELATIONSHIP());
#714=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#713,#707);
#717=CARTESIAN_POINT('',(4.E1,3.25E1,0.E0));
#718=DIRECTION('',(0.E0,0.E0,1.E0));
#719=DIRECTION('',(-1.E0,0.E0,0.E0));
#720=AXIS2_PLACEMENT_3D('',#717,#718,#719);
#721=ITEM_DEFINED_TRANSFORMATION('','',#698,#720);
#722=(REPRESENTATION_RELATIONSHIP('','',#699,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#721)SHAPE_REPRESENTATION_RELATIONSHIP());
#723=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#722,#716);
#726=CARTESIAN_POINT('',(4.E1,0.E0,3.25E1));
#727=DIRECTION('',(0.E0,0.E0,1.E0));
#728=DIRECTION('',(-1.E0,0.E0,0.E0));
#729=AXIS2_PLACEMENT_3D('',#726,#727,#728);
#730=ITEM_DEFINED_TRANSFORMATION('','',#698,#729);
#731=(REPRESENTATION_RELATIONSHIP('','',#699,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#730)SHAPE_REPRESENTATION_RELATIONSHIP());
#732=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#731,#725);
#735=CARTESIAN_POINT('',(4.E1,-3.25E1,0.E0));
#736=DIRECTION('',(0.E0,0.E0,1.E0));
#737=DIRECTION('',(-1.E0,0.E0,0.E0));
#738=AXIS2_PLACEMENT_3D('',#735,#736,#737);
#739=ITEM_DEFINED_TRANSFORMATION('','',#698,#738);
#740=(REPRESENTATION_RELATIONSHIP('','',#699,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#739)SHAPE_REPRESENTATION_RELATIONSHIP());
#741=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#740,#734);
#743=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#744=DIRECTION('',(0.E0,0.E0,-1.E0));
#745=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#746=AXIS2_PLACEMENT_3D('',#743,#744,#745);
#748=DIRECTION('',(0.E0,0.E0,1.E0));
#749=VECTOR('',#748,1.2E0);
#750=CARTESIAN_POINT('',(4.475E0,2.453738644056E-1,0.E0));
#751=LINE('',#750,#749);
#752=DIRECTION('',(0.E0,0.E0,1.E0));
#753=VECTOR('',#752,1.2E0);
#754=CARTESIAN_POINT('',(-4.475E0,-1.525648086334E1,0.E0));
#755=LINE('',#754,#753);
#756=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#757=DIRECTION('',(0.E0,0.E0,1.E0));
#758=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#759=AXIS2_PLACEMENT_3D('',#756,#757,#758);
#761=DIRECTION('',(4.924038765061E-1,8.528685319524E-1,1.736481776669E-1));
#762=VECTOR('',#761,2.487795199120E0);
#763=CARTESIAN_POINT('',(-4.475E0,-1.525648086334E1,1.2E0));
#764=LINE('',#763,#762);
#765=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.2E0));
#766=DIRECTION('',(0.E0,0.E0,1.E0));
#767=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#768=AXIS2_PLACEMENT_3D('',#765,#766,#767);
#770=DIRECTION('',(-4.924038765061E-1,-8.528685319524E-1,1.736481776669E-1));
#771=VECTOR('',#770,2.487795199120E0);
#772=CARTESIAN_POINT('',(4.475E0,2.453738644056E-1,1.2E0));
#773=LINE('',#772,#771);
#774=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,1.454694890234E0));
#775=CARTESIAN_POINT('',(-6.252800413351E0,-3.610056001837E0,1.479860408795E0));
#776=CARTESIAN_POINT('',(-5.762767617786E0,-3.327135435406E0,1.525401397777E0));
#777=CARTESIAN_POINT('',(-5.047577560003E0,-2.914220263023E0,1.577637667355E0));
#778=CARTESIAN_POINT('',(-4.331589701669E0,-2.500844480277E0,1.613990674380E0));
#779=CARTESIAN_POINT('',(-3.611463785290E0,-2.085079588606E0,1.632777945966E0));
#780=CARTESIAN_POINT('',(-2.888535498408E0,-1.667696747570E0,1.632777934085E0));
#781=CARTESIAN_POINT('',(-2.168409803174E0,-1.251931983576E0,1.613990656902E0));
#782=CARTESIAN_POINT('',(-1.452421568366E0,-8.385559834729E-1,
1.577637612134E0));
#783=CARTESIAN_POINT('',(-7.372322018377E-1,-4.256412101863E-1,
1.525401378373E0));
#784=CARTESIAN_POINT('',(-2.471995248729E-1,-1.427207122289E-1,
1.479860402506E0));
#785=CARTESIAN_POINT('',(0.E0,0.E0,1.454694890234E0));
#787=DIRECTION('',(0.E0,0.E0,1.E0));
#788=VECTOR('',#787,5.869938867872E0);
#789=CARTESIAN_POINT('',(0.E0,0.E0,1.454694890234E0));
#790=LINE('',#789,#788);
#791=CARTESIAN_POINT('',(0.E0,0.E0,7.324633758106E0));
#792=CARTESIAN_POINT('',(-2.499297443114E-1,-1.442970051567E-1,
7.377153572877E0));
#793=CARTESIAN_POINT('',(-7.439653356181E-1,-4.295285867869E-1,
7.471796470210E0));
#794=CARTESIAN_POINT('',(-1.460799981654E0,-8.433932626401E-1,
7.579481632549E0));
#795=CARTESIAN_POINT('',(-2.174958056017E0,-1.255712619118E0,7.653918087214E0));
#796=CARTESIAN_POINT('',(-2.891151717607E0,-1.669207222428E0,7.692217459405E0));
#797=CARTESIAN_POINT('',(-3.609335345140E0,-2.083850733112E0,7.692203716707E0));
#798=CARTESIAN_POINT('',(-4.325502580908E0,-2.497330079468E0,7.653881904122E0));
#799=CARTESIAN_POINT('',(-5.039642837577E0,-2.909639148895E0,7.579421554921E0));
#800=CARTESIAN_POINT('',(-5.756116568748E0,-3.323295450454E0,7.471778303552E0));
#801=CARTESIAN_POINT('',(-6.250090766005E0,-3.608491586213E0,7.377149262874E0));
#802=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,7.324633758106E0));
#804=CARTESIAN_POINT('',(3.25E0,-1.876388374866E0,1.632001102736E0));
#805=CARTESIAN_POINT('',(3.468795868355E0,-2.002710228358E0,1.632001102736E0));
#806=CARTESIAN_POINT('',(3.904929777871E0,-2.254512258420E0,1.626792282401E0));
#807=CARTESIAN_POINT('',(4.555328164682E0,-2.630019942127E0,1.603934797260E0));
#808=CARTESIAN_POINT('',(5.200211483531E0,-3.002343499859E0,1.567263117545E0));
#809=CARTESIAN_POINT('',(5.842519154422E0,-3.373180006551E0,1.518188170824E0));
#810=CARTESIAN_POINT('',(6.279903865631E0,-3.625704187307E0,1.477101211498E0));
#811=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,1.454694890234E0));
#813=DIRECTION('',(0.E0,0.E0,1.E0));
#814=VECTOR('',#813,5.869938867872E0);
#815=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,1.454694890234E0));
#816=LINE('',#815,#814);
#817=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,7.324633758106E0));
#818=CARTESIAN_POINT('',(6.250070255689E0,-3.608479744576E0,7.377153572877E0));
#819=CARTESIAN_POINT('',(5.756034664382E0,-3.323248162946E0,7.471796470210E0));
#820=CARTESIAN_POINT('',(5.039200018346E0,-2.909383487092E0,7.579481632549E0));
#821=CARTESIAN_POINT('',(4.325041943983E0,-2.497064130615E0,7.653918087214E0));
#822=CARTESIAN_POINT('',(3.608848282393E0,-2.083569527304E0,7.692217459405E0));
#823=CARTESIAN_POINT('',(2.890664654860E0,-1.668926016620E0,7.692203716707E0));
#824=CARTESIAN_POINT('',(2.174497419092E0,-1.255446670265E0,7.653881904122E0));
#825=CARTESIAN_POINT('',(1.460357162423E0,-8.431376008378E-1,7.579421554921E0));
#826=CARTESIAN_POINT('',(7.438834312519E-1,-4.294812992790E-1,
7.471778303552E0));
#827=CARTESIAN_POINT('',(2.499092339950E-1,-1.442851635200E-1,
7.377149262874E0));
#828=CARTESIAN_POINT('',(0.E0,0.E0,7.324633758106E0));
#830=CARTESIAN_POINT('',(0.E0,0.E0,1.454694890234E0));
#831=CARTESIAN_POINT('',(2.219201333417E-1,-1.281256487234E-1,
1.477286899025E0));
#832=CARTESIAN_POINT('',(6.620870386811E-1,-3.822561300095E-1,
1.518597700447E0));
#833=CARTESIAN_POINT('',(1.305632084314E0,-7.538070353411E-1,1.567655238758E0));
#834=CARTESIAN_POINT('',(1.949796164984E0,-1.125715340718E0,1.604160055023E0));
#835=CARTESIAN_POINT('',(2.597983990465E0,-1.499946756245E0,1.626841351538E0));
#836=CARTESIAN_POINT('',(3.032271981164E0,-1.750683044581E0,1.632001102736E0));
#837=CARTESIAN_POINT('',(3.25E0,-1.876388374866E0,1.632001102736E0));
#839=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.2E0));
#840=DIRECTION('',(0.E0,0.E0,-1.E0));
#841=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#842=AXIS2_PLACEMENT_3D('',#839,#840,#841);
#844=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,1.454694890234E0));
#845=CARTESIAN_POINT('',(-2.219201333417E-1,-1.488298135021E1,
1.477286899025E0));
#846=CARTESIAN_POINT('',(-6.620870386811E-1,-1.462885086892E1,
1.518597700447E0));
#847=CARTESIAN_POINT('',(-1.305632084314E0,-1.425729996359E1,1.567655238758E0));
#848=CARTESIAN_POINT('',(-1.949796164984E0,-1.388539165821E1,1.604160055023E0));
#849=CARTESIAN_POINT('',(-2.597983990465E0,-1.351116024268E1,1.626841351538E0));
#850=CARTESIAN_POINT('',(-3.032271981164E0,-1.326042395435E1,1.632001102736E0));
#851=CARTESIAN_POINT('',(-3.25E0,-1.313471862406E1,1.632001102736E0));
#853=CARTESIAN_POINT('',(-3.25E0,-1.313471862406E1,1.632001102736E0));
#854=CARTESIAN_POINT('',(-3.468795868355E0,-1.300839677057E1,1.632001102736E0));
#855=CARTESIAN_POINT('',(-3.904929777871E0,-1.275659474051E1,1.626792282401E0));
#856=CARTESIAN_POINT('',(-4.555328164682E0,-1.238108705680E1,1.603934797260E0));
#857=CARTESIAN_POINT('',(-5.200211483531E0,-1.200876349907E1,1.567263117545E0));
#858=CARTESIAN_POINT('',(-5.842519154422E0,-1.163792699238E1,1.518188170824E0));
#859=CARTESIAN_POINT('',(-6.279903865631E0,-1.138540281162E1,1.477101211498E0));
#860=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,1.454694890234E0));
#862=DIRECTION('',(0.E0,0.E0,1.E0));
#863=VECTOR('',#862,5.869938867872E0);
#864=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,1.454694890234E0));
#865=LINE('',#864,#863);
#866=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,7.324633758106E0));
#867=CARTESIAN_POINT('',(-6.250070255689E0,-1.140262725435E1,7.377153572877E0));
#868=CARTESIAN_POINT('',(-5.756034664382E0,-1.168785883598E1,7.471796470210E0));
#869=CARTESIAN_POINT('',(-5.039200018346E0,-1.210172351184E1,7.579481632549E0));
#870=CARTESIAN_POINT('',(-4.325041943983E0,-1.251404286832E1,7.653918087214E0));
#871=CARTESIAN_POINT('',(-3.608848282393E0,-1.292753747163E1,7.692217459405E0));
#872=CARTESIAN_POINT('',(-2.890664654860E0,-1.334218098231E1,7.692203716707E0));
#873=CARTESIAN_POINT('',(-2.174497419092E0,-1.375566032867E1,7.653881904122E0));
#874=CARTESIAN_POINT('',(-1.460357162423E0,-1.416796939809E1,7.579421554921E0));
#875=CARTESIAN_POINT('',(-7.438834312519E-1,-1.458162569965E1,
7.471778303552E0));
#876=CARTESIAN_POINT('',(-2.499092339950E-1,-1.486682183541E1,
7.377149262874E0));
#877=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,7.324633758106E0));
#879=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,1.454694890234E0));
#880=CARTESIAN_POINT('',(-6.5E0,-1.097288875341E1,1.479860408795E0));
#881=CARTESIAN_POINT('',(-6.5E0,-1.040704762054E1,1.525401397777E0));
#882=CARTESIAN_POINT('',(-6.5E0,-9.581217275779E0,1.577637667355E0));
#883=CARTESIAN_POINT('',(-6.5E0,-8.754465710287E0,1.613990674380E0));
#884=CARTESIAN_POINT('',(-6.5E0,-7.922935926945E0,1.632777945966E0));
#885=CARTESIAN_POINT('',(-6.5E0,-7.088170244872E0,1.632777934085E0));
#886=CARTESIAN_POINT('',(-6.5E0,-6.256640716884E0,1.613990656902E0));
#887=CARTESIAN_POINT('',(-6.5E0,-5.429888716678E0,1.577637612134E0));
#888=CARTESIAN_POINT('',(-6.5E0,-4.604059170105E0,1.525401378373E0));
#889=CARTESIAN_POINT('',(-6.5E0,-4.038218174190E0,1.479860402506E0));
#890=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,1.454694890234E0));
#892=DIRECTION('',(0.E0,0.E0,1.E0));
#893=VECTOR('',#892,5.869938867872E0);
#894=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,1.454694890234E0));
#895=LINE('',#894,#893);
#896=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,7.324633758106E0));
#897=CARTESIAN_POINT('',(-6.5E0,-4.041370760046E0,7.377153572877E0));
#898=CARTESIAN_POINT('',(-6.5E0,-4.611833923306E0,7.471796470210E0));
#899=CARTESIAN_POINT('',(-6.5E0,-5.439563275013E0,7.579481632549E0));
#900=CARTESIAN_POINT('',(-6.5E0,-6.264201987968E0,7.653918087214E0));
#901=CARTESIAN_POINT('',(-6.5E0,-7.091191194589E0,7.692217459405E0));
#902=CARTESIAN_POINT('',(-6.5E0,-7.920478215957E0,7.692203716707E0));
#903=CARTESIAN_POINT('',(-6.5E0,-8.747436908668E0,7.653881904122E0));
#904=CARTESIAN_POINT('',(-6.5E0,-9.572055047522E0,7.579421554921E0));
#905=CARTESIAN_POINT('',(-6.5E0,-1.039936765064E1,7.471778303552E0));
#906=CARTESIAN_POINT('',(-6.5E0,-1.096975992216E1,7.377149262874E0));
#907=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,7.324633758106E0));
#909=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#910=DIRECTION('',(0.E0,0.E0,1.E0));
#911=DIRECTION('',(0.E0,1.E0,0.E0));
#912=AXIS2_PLACEMENT_3D('',#909,#910,#911);
#914=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#915=DIRECTION('',(0.E0,0.E0,1.E0));
#916=DIRECTION('',(0.E0,-1.E0,0.E0));
#917=AXIS2_PLACEMENT_3D('',#914,#915,#916);
#919=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#920=DIRECTION('',(0.E0,0.E0,-1.E0));
#921=DIRECTION('',(-1.E0,0.E0,0.E0));
#922=AXIS2_PLACEMENT_3D('',#919,#920,#921);
#924=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
#925=VECTOR('',#924,9.567154749454E-1);
#926=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,8.E0));
#927=LINE('',#926,#925);
#928=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.3235E0));
#929=DIRECTION('',(0.E0,0.E0,-1.E0));
#930=DIRECTION('',(-1.E0,0.E0,0.E0));
#931=AXIS2_PLACEMENT_3D('',#928,#929,#930);
#933=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
#934=VECTOR('',#933,9.567154749454E-1);
#935=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,8.E0));
#936=LINE('',#935,#934);
#937=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#938=DIRECTION('',(0.E0,0.E0,-1.E0));
#939=DIRECTION('',(1.E0,0.E0,0.E0));
#940=AXIS2_PLACEMENT_3D('',#937,#938,#939);
#942=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.3235E0));
#943=DIRECTION('',(0.E0,0.E0,-1.E0));
#944=DIRECTION('',(1.E0,0.E0,0.E0));
#945=AXIS2_PLACEMENT_3D('',#942,#943,#944);
#947=DIRECTION('',(0.E0,0.E0,-1.E0));
#948=VECTOR('',#947,6.647E0);
#949=CARTESIAN_POINT('',(3.3235E0,-7.505553499465E0,7.3235E0));
#950=LINE('',#949,#948);
#951=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#952=DIRECTION('',(0.E0,0.E0,-1.E0));
#953=DIRECTION('',(1.E0,0.E0,0.E0));
#954=AXIS2_PLACEMENT_3D('',#951,#952,#953);
#956=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,6.765E-1));
#957=DIRECTION('',(0.E0,0.E0,-1.E0));
#958=DIRECTION('',(1.E0,0.E0,0.E0));
#959=AXIS2_PLACEMENT_3D('',#956,#957,#958);
#961=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#962=DIRECTION('',(0.E0,0.E0,-1.E0));
#963=DIRECTION('',(-1.E0,0.E0,0.E0));
#964=AXIS2_PLACEMENT_3D('',#961,#962,#963);
#966=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
#967=VECTOR('',#966,9.567154749454E-1);
#968=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,0.E0));
#969=LINE('',#968,#967);
#970=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,6.765E-1));
#971=DIRECTION('',(0.E0,0.E0,-1.E0));
#972=DIRECTION('',(-1.E0,0.E0,0.E0));
#973=AXIS2_PLACEMENT_3D('',#970,#971,#972);
#975=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
#976=VECTOR('',#975,9.567154749454E-1);
#977=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,0.E0));
#978=LINE('',#977,#976);
#979=DIRECTION('',(0.E0,0.E0,-1.E0));
#980=VECTOR('',#979,6.647E0);
#981=CARTESIAN_POINT('',(-3.3235E0,-7.505553499465E0,7.3235E0));
#982=LINE('',#981,#980);
#983=DIRECTION('',(0.E0,9.396926207859E-1,-3.420201433257E-1));
#984=VECTOR('',#983,1.974638789771E0);
#985=CARTESIAN_POINT('',(0.E0,-1.855553499465E0,8.E0));
#986=LINE('',#985,#984);
#987=DIRECTION('',(0.E0,-9.396926207859E-1,-3.420201433257E-1));
#988=VECTOR('',#987,1.974638789771E0);
#989=CARTESIAN_POINT('',(0.E0,-1.315555349947E1,8.E0));
#990=LINE('',#989,#988);
#991=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,1.454694890234E0));
#992=CARTESIAN_POINT('',(6.5E0,-4.038218245523E0,1.479860408795E0));
#993=CARTESIAN_POINT('',(6.5E0,-4.604059378386E0,1.525401397777E0));
#994=CARTESIAN_POINT('',(6.5E0,-5.429889723152E0,1.577637667355E0));
#995=CARTESIAN_POINT('',(6.5E0,-6.256641288643E0,1.613990674380E0));
#996=CARTESIAN_POINT('',(6.5E0,-7.088171071986E0,1.632777945966E0));
#997=CARTESIAN_POINT('',(6.5E0,-7.922936754058E0,1.632777934085E0));
#998=CARTESIAN_POINT('',(6.5E0,-8.754466282046E0,1.613990656902E0));
#999=CARTESIAN_POINT('',(6.5E0,-9.581218282252E0,1.577637612134E0));
#1000=CARTESIAN_POINT('',(6.5E0,-1.040704782883E1,1.525401378373E0));
#1001=CARTESIAN_POINT('',(6.5E0,-1.097288882474E1,1.479860402506E0));
#1002=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,1.454694890234E0));
#1004=DIRECTION('',(0.E0,0.E0,1.E0));
#1005=VECTOR('',#1004,5.869938867872E0);
#1006=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,1.454694890234E0));
#1007=LINE('',#1006,#1005);
#1008=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,7.324633758106E0));
#1009=CARTESIAN_POINT('',(6.5E0,-1.096973623888E1,7.377153572877E0));
#1010=CARTESIAN_POINT('',(6.5E0,-1.039927307562E1,7.471796470210E0));
#1011=CARTESIAN_POINT('',(6.5E0,-9.571543723918E0,7.579481632549E0));
#1012=CARTESIAN_POINT('',(6.5E0,-8.746905010962E0,7.653918087214E0));
#1013=CARTESIAN_POINT('',(6.5E0,-7.919915804341E0,7.692217459405E0));
#1014=CARTESIAN_POINT('',(6.5E0,-7.090628782973E0,7.692203716707E0));
#1015=CARTESIAN_POINT('',(6.5E0,-6.263670090262E0,7.653881904122E0));
#1016=CARTESIAN_POINT('',(6.5E0,-5.439051951408E0,7.579421554921E0));
#1017=CARTESIAN_POINT('',(6.5E0,-4.611739348291E0,7.471778303552E0));
#1018=CARTESIAN_POINT('',(6.5E0,-4.041347076773E0,7.377149262874E0));
#1019=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,7.324633758106E0));
#1021=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,1.454694890234E0));
#1022=CARTESIAN_POINT('',(6.252800413351E0,-1.140105099709E1,1.479860408795E0));
#1023=CARTESIAN_POINT('',(5.762767617786E0,-1.168397156352E1,1.525401397777E0));
#1024=CARTESIAN_POINT('',(5.047577560003E0,-1.209688673591E1,1.577637667355E0));
#1025=CARTESIAN_POINT('',(4.331589701669E0,-1.251026251865E1,1.613990674380E0));
#1026=CARTESIAN_POINT('',(3.611463785290E0,-1.292602741032E1,1.632777945966E0));
#1027=CARTESIAN_POINT('',(2.888535498408E0,-1.334341025136E1,1.632777934085E0));
#1028=CARTESIAN_POINT('',(2.168409803174E0,-1.375917501535E1,1.613990656902E0));
#1029=CARTESIAN_POINT('',(1.452421568366E0,-1.417255101546E1,1.577637612134E0));
#1030=CARTESIAN_POINT('',(7.372322018377E-1,-1.458546578874E1,
1.525401378373E0));
#1031=CARTESIAN_POINT('',(2.471995248729E-1,-1.486838628670E1,
1.479860402506E0));
#1032=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,1.454694890234E0));
#1034=DIRECTION('',(0.E0,0.E0,1.E0));
#1035=VECTOR('',#1034,5.869938867872E0);
#1036=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,1.454694890234E0));
#1037=LINE('',#1036,#1035);
#1038=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,7.324633758106E0));
#1039=CARTESIAN_POINT('',(2.499297443114E-1,-1.486680999377E1,
7.377153572877E0));
#1040=CARTESIAN_POINT('',(7.439653356181E-1,-1.458157841214E1,
7.471796470210E0));
#1041=CARTESIAN_POINT('',(1.460799981654E0,-1.416771373629E1,7.579481632549E0));
#1042=CARTESIAN_POINT('',(2.174958056017E0,-1.375539437981E1,7.653918087214E0));
#1043=CARTESIAN_POINT('',(2.891151717607E0,-1.334189977650E1,7.692217459405E0));
#1044=CARTESIAN_POINT('',(3.609335345140E0,-1.292725626582E1,7.692203716707E0));
#1045=CARTESIAN_POINT('',(4.325502580908E0,-1.251377691946E1,7.653881904122E0));
#1046=CARTESIAN_POINT('',(5.039642837577E0,-1.210146785004E1,7.579421554921E0));
#1047=CARTESIAN_POINT('',(5.756116568748E0,-1.168781154848E1,7.471778303552E0));
#1048=CARTESIAN_POINT('',(6.250090766005E0,-1.140261541272E1,7.377149262874E0));
#1049=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,7.324633758106E0));
#1051=CARTESIAN_POINT('',(0.E0,-1.855553499465E0,8.E0));
#1052=CARTESIAN_POINT('',(0.E0,-1.315555349947E1,8.E0));
#1053=VERTEX_POINT('',#1051);
#1054=VERTEX_POINT('',#1052);
#1055=VERTEX_POINT('',#791);
#1056=VERTEX_POINT('',#802);
#1057=VERTEX_POINT('',#907);
#1058=VERTEX_POINT('',#877);
#1059=VERTEX_POINT('',#1049);
#1060=VERTEX_POINT('',#1019);
#1061=CARTESIAN_POINT('',(4.475E0,2.453738644056E-1,0.E0));
#1062=CARTESIAN_POINT('',(4.475E0,2.453738644056E-1,1.2E0));
#1063=VERTEX_POINT('',#1061);
#1064=VERTEX_POINT('',#1062);
#1065=CARTESIAN_POINT('',(-4.475E0,-1.525648086334E1,0.E0));
#1066=CARTESIAN_POINT('',(-4.475E0,-1.525648086334E1,1.2E0));
#1067=VERTEX_POINT('',#1065);
#1068=VERTEX_POINT('',#1066);
#1069=VERTEX_POINT('',#774);
#1070=VERTEX_POINT('',#785);
#1071=VERTEX_POINT('',#879);
#1072=VERTEX_POINT('',#844);
#1073=VERTEX_POINT('',#851);
#1074=VERTEX_POINT('',#1021);
#1075=VERTEX_POINT('',#991);
#1076=VERTEX_POINT('',#804);
#1077=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,8.E0));
#1078=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,8.E0));
#1079=VERTEX_POINT('',#1077);
#1080=VERTEX_POINT('',#1078);
#1081=CARTESIAN_POINT('',(3.3235E0,-7.505553499465E0,7.3235E0));
#1082=CARTESIAN_POINT('',(-3.3235E0,-7.505553499465E0,7.3235E0));
#1083=VERTEX_POINT('',#1081);
#1084=VERTEX_POINT('',#1082);
#1085=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,0.E0));
#1086=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,0.E0));
#1087=VERTEX_POINT('',#1085);
#1088=VERTEX_POINT('',#1086);
#1089=CARTESIAN_POINT('',(3.3235E0,-7.505553499465E0,6.765E-1));
#1090=CARTESIAN_POINT('',(-3.3235E0,-7.505553499465E0,6.765E-1));
#1091=VERTEX_POINT('',#1089);
#1092=VERTEX_POINT('',#1090);
#1093=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1094=DIRECTION('',(0.E0,0.E0,1.E0));
#1095=DIRECTION('',(1.E0,0.E0,0.E0));
#1096=AXIS2_PLACEMENT_3D('',#1093,#1094,#1095);
#1097=PLANE('',#1096);
#1099=ORIENTED_EDGE('',*,*,#1098,.F.);
#1101=ORIENTED_EDGE('',*,*,#1100,.T.);
#1102=EDGE_LOOP('',(#1099,#1101));
#1103=FACE_OUTER_BOUND('',#1102,.F.);
#1105=ORIENTED_EDGE('',*,*,#1104,.T.);
#1107=ORIENTED_EDGE('',*,*,#1106,.T.);
#1108=EDGE_LOOP('',(#1105,#1107));
#1109=FACE_BOUND('',#1108,.F.);
#1110=ADVANCED_FACE('',(#1103,#1109),#1097,.F.);
#1111=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.713601157873E0));
#1112=DIRECTION('',(0.E0,0.E0,-1.E0));
#1113=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#1114=AXIS2_PLACEMENT_3D('',#1111,#1112,#1113);
#1115=CYLINDRICAL_SURFACE('',#1114,8.95E0);
#1117=ORIENTED_EDGE('',*,*,#1116,.F.);
#1118=ORIENTED_EDGE('',*,*,#1098,.T.);
#1120=ORIENTED_EDGE('',*,*,#1119,.T.);
#1122=ORIENTED_EDGE('',*,*,#1121,.F.);
#1123=EDGE_LOOP('',(#1117,#1118,#1120,#1122));
#1124=FACE_OUTER_BOUND('',#1123,.F.);
#1125=ADVANCED_FACE('',(#1124),#1115,.T.);
#1126=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.713601157873E0));
#1127=DIRECTION('',(0.E0,0.E0,-1.E0));
#1128=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#1129=AXIS2_PLACEMENT_3D('',#1126,#1127,#1128);
#1130=CYLINDRICAL_SURFACE('',#1129,8.95E0);
#1131=ORIENTED_EDGE('',*,*,#1116,.T.);
#1133=ORIENTED_EDGE('',*,*,#1132,.T.);
#1134=ORIENTED_EDGE('',*,*,#1119,.F.);
#1135=ORIENTED_EDGE('',*,*,#1100,.F.);
#1136=EDGE_LOOP('',(#1131,#1133,#1134,#1135));
#1137=FACE_OUTER_BOUND('',#1136,.F.);
#1138=ADVANCED_FACE('',(#1137),#1130,.T.);
#1139=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.416000551368E0));
#1140=DIRECTION('',(0.E0,0.E0,-1.E0));
#1141=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#1142=AXIS2_PLACEMENT_3D('',#1139,#1140,#1141);
#1143=CONICAL_SURFACE('',#1142,7.725E0,8.E1);
#1145=ORIENTED_EDGE('',*,*,#1144,.F.);
#1147=ORIENTED_EDGE('',*,*,#1146,.F.);
#1149=ORIENTED_EDGE('',*,*,#1148,.F.);
#1151=ORIENTED_EDGE('',*,*,#1150,.F.);
#1152=ORIENTED_EDGE('',*,*,#1132,.F.);
#1154=ORIENTED_EDGE('',*,*,#1153,.T.);
#1156=ORIENTED_EDGE('',*,*,#1155,.F.);
#1157=EDGE_LOOP('',(#1145,#1147,#1149,#1151,#1152,#1154,#1156));
#1158=FACE_OUTER_BOUND('',#1157,.F.);
#1159=ADVANCED_FACE('',(#1158),#1143,.T.);
#1160=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1161=DIRECTION('',(-5.E-1,8.660254037844E-1,0.E0));
#1162=DIRECTION('',(-8.660254037844E-1,-5.E-1,0.E0));
#1163=AXIS2_PLACEMENT_3D('',#1160,#1161,#1162);
#1164=PLANE('',#1163);
#1165=ORIENTED_EDGE('',*,*,#1144,.T.);
#1167=ORIENTED_EDGE('',*,*,#1166,.T.);
#1169=ORIENTED_EDGE('',*,*,#1168,.T.);
#1171=ORIENTED_EDGE('',*,*,#1170,.F.);
#1172=EDGE_LOOP('',(#1165,#1167,#1169,#1171));
#1173=FACE_OUTER_BOUND('',#1172,.F.);
#1174=ADVANCED_FACE('',(#1173),#1164,.T.);
#1175=CARTESIAN_POINT('',(6.5E0,-3.752776749733E0,0.E0));
#1176=DIRECTION('',(5.E-1,8.660254037844E-1,0.E0));
#1177=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
#1178=AXIS2_PLACEMENT_3D('',#1175,#1176,#1177);
#1179=PLANE('',#1178);
#1181=ORIENTED_EDGE('',*,*,#1180,.T.);
#1183=ORIENTED_EDGE('',*,*,#1182,.T.);
#1185=ORIENTED_EDGE('',*,*,#1184,.T.);
#1186=ORIENTED_EDGE('',*,*,#1166,.F.);
#1187=ORIENTED_EDGE('',*,*,#1155,.T.);
#1188=EDGE_LOOP('',(#1181,#1183,#1185,#1186,#1187));
#1189=FACE_OUTER_BOUND('',#1188,.F.);
#1190=ADVANCED_FACE('',(#1189),#1179,.T.);
#1191=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,1.416000551368E0));
#1192=DIRECTION('',(0.E0,0.E0,-1.E0));
#1193=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#1194=AXIS2_PLACEMENT_3D('',#1191,#1192,#1193);
#1195=CONICAL_SURFACE('',#1194,7.725E0,8.E1);
#1197=ORIENTED_EDGE('',*,*,#1196,.F.);
#1199=ORIENTED_EDGE('',*,*,#1198,.F.);
#1201=ORIENTED_EDGE('',*,*,#1200,.F.);
#1202=ORIENTED_EDGE('',*,*,#1180,.F.);
#1203=ORIENTED_EDGE('',*,*,#1153,.F.);
#1204=ORIENTED_EDGE('',*,*,#1121,.T.);
#1205=ORIENTED_EDGE('',*,*,#1150,.T.);
#1206=EDGE_LOOP('',(#1197,#1199,#1201,#1202,#1203,#1204,#1205));
#1207=FACE_OUTER_BOUND('',#1206,.F.);
#1208=ADVANCED_FACE('',(#1207),#1195,.T.);
#1209=CARTESIAN_POINT('',(-6.5E0,-1.125833024920E1,0.E0));
#1210=DIRECTION('',(-5.E-1,-8.660254037844E-1,0.E0));
#1211=DIRECTION('',(8.660254037844E-1,-5.E-1,0.E0));
#1212=AXIS2_PLACEMENT_3D('',#1209,#1210,#1211);
#1213=PLANE('',#1212);
#1214=ORIENTED_EDGE('',*,*,#1196,.T.);
#1215=ORIENTED_EDGE('',*,*,#1148,.T.);
#1217=ORIENTED_EDGE('',*,*,#1216,.T.);
#1219=ORIENTED_EDGE('',*,*,#1218,.T.);
#1221=ORIENTED_EDGE('',*,*,#1220,.F.);
#1222=EDGE_LOOP('',(#1214,#1215,#1217,#1219,#1221));
#1223=FACE_OUTER_BOUND('',#1222,.F.);
#1224=ADVANCED_FACE('',(#1223),#1213,.T.);
#1225=CARTESIAN_POINT('',(-6.5E0,-3.752776749733E0,0.E0));
#1226=DIRECTION('',(-1.E0,0.E0,0.E0));
#1227=DIRECTION('',(0.E0,-1.E0,0.E0));
#1228=AXIS2_PLACEMENT_3D('',#1225,#1226,#1227);
#1229=PLANE('',#1228);
#1230=ORIENTED_EDGE('',*,*,#1146,.T.);
#1231=ORIENTED_EDGE('',*,*,#1170,.T.);
#1233=ORIENTED_EDGE('',*,*,#1232,.T.);
#1234=ORIENTED_EDGE('',*,*,#1216,.F.);
#1235=EDGE_LOOP('',(#1230,#1231,#1233,#1234));
#1236=FACE_OUTER_BOUND('',#1235,.F.);
#1237=ADVANCED_FACE('',(#1236),#1229,.T.);
#1238=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.662316879053E0));
#1239=DIRECTION('',(0.E0,0.E0,-1.E0));
#1240=DIRECTION('',(0.E0,-1.E0,0.E0));
#1241=AXIS2_PLACEMENT_3D('',#1238,#1239,#1240);
#1242=CONICAL_SURFACE('',#1241,6.577776749733E0,7.E1);
#1244=ORIENTED_EDGE('',*,*,#1243,.T.);
#1246=ORIENTED_EDGE('',*,*,#1245,.T.);
#1247=ORIENTED_EDGE('',*,*,#1218,.F.);
#1248=ORIENTED_EDGE('',*,*,#1232,.F.);
#1249=ORIENTED_EDGE('',*,*,#1168,.F.);
#1251=ORIENTED_EDGE('',*,*,#1250,.F.);
#1252=EDGE_LOOP('',(#1244,#1246,#1247,#1248,#1249,#1251));
#1253=FACE_OUTER_BOUND('',#1252,.F.);
#1254=ADVANCED_FACE('',(#1253),#1242,.T.);
#1255=CARTESIAN_POINT('',(0.E0,0.E0,8.E0));
#1256=DIRECTION('',(0.E0,0.E0,1.E0));
#1257=DIRECTION('',(1.E0,0.E0,0.E0));
#1258=AXIS2_PLACEMENT_3D('',#1255,#1256,#1257);
#1259=PLANE('',#1258);
#1260=ORIENTED_EDGE('',*,*,#1243,.F.);
#1262=ORIENTED_EDGE('',*,*,#1261,.F.);
#1263=EDGE_LOOP('',(#1260,#1262));
#1264=FACE_OUTER_BOUND('',#1263,.F.);
#1266=ORIENTED_EDGE('',*,*,#1265,.F.);
#1268=ORIENTED_EDGE('',*,*,#1267,.F.);
#1269=EDGE_LOOP('',(#1266,#1268));
#1270=FACE_BOUND('',#1269,.F.);
#1271=ADVANCED_FACE('',(#1264,#1270),#1259,.T.);
#1272=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.66175E0));
#1273=DIRECTION('',(0.E0,0.E0,1.E0));
#1274=DIRECTION('',(1.E0,0.E0,0.E0));
#1275=AXIS2_PLACEMENT_3D('',#1272,#1273,#1274);
#1276=CONICAL_SURFACE('',#1275,3.66175E0,4.5E1);
#1277=ORIENTED_EDGE('',*,*,#1265,.T.);
#1279=ORIENTED_EDGE('',*,*,#1278,.T.);
#1281=ORIENTED_EDGE('',*,*,#1280,.F.);
#1283=ORIENTED_EDGE('',*,*,#1282,.F.);
#1284=EDGE_LOOP('',(#1277,#1279,#1281,#1283));
#1285=FACE_OUTER_BOUND('',#1284,.F.);
#1286=ADVANCED_FACE('',(#1285),#1276,.F.);
#1287=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.66175E0));
#1288=DIRECTION('',(0.E0,0.E0,1.E0));
#1289=DIRECTION('',(1.E0,0.E0,0.E0));
#1290=AXIS2_PLACEMENT_3D('',#1287,#1288,#1289);
#1291=CONICAL_SURFACE('',#1290,3.66175E0,4.5E1);
#1292=ORIENTED_EDGE('',*,*,#1267,.T.);
#1293=ORIENTED_EDGE('',*,*,#1282,.T.);
#1295=ORIENTED_EDGE('',*,*,#1294,.F.);
#1296=ORIENTED_EDGE('',*,*,#1278,.F.);
#1297=EDGE_LOOP('',(#1292,#1293,#1295,#1296));
#1298=FACE_OUTER_BOUND('',#1297,.F.);
#1299=ADVANCED_FACE('',(#1298),#1291,.F.);
#1300=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#1301=DIRECTION('',(0.E0,0.E0,-1.E0));
#1302=DIRECTION('',(-1.E0,0.E0,0.E0));
#1303=AXIS2_PLACEMENT_3D('',#1300,#1301,#1302);
#1304=CYLINDRICAL_SURFACE('',#1303,3.3235E0);
#1306=ORIENTED_EDGE('',*,*,#1305,.F.);
#1308=ORIENTED_EDGE('',*,*,#1307,.F.);
#1309=ORIENTED_EDGE('',*,*,#1294,.T.);
#1311=ORIENTED_EDGE('',*,*,#1310,.T.);
#1312=EDGE_LOOP('',(#1306,#1308,#1309,#1311));
#1313=FACE_OUTER_BOUND('',#1312,.F.);
#1314=ADVANCED_FACE('',(#1313),#1304,.F.);
#1315=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.66175E0));
#1316=DIRECTION('',(0.E0,0.E0,1.E0));
#1317=DIRECTION('',(-1.E0,0.E0,0.E0));
#1318=AXIS2_PLACEMENT_3D('',#1315,#1316,#1317);
#1319=CONICAL_SURFACE('',#1318,3.66175E0,4.5E1);
#1320=ORIENTED_EDGE('',*,*,#1106,.F.);
#1322=ORIENTED_EDGE('',*,*,#1321,.T.);
#1323=ORIENTED_EDGE('',*,*,#1305,.T.);
#1325=ORIENTED_EDGE('',*,*,#1324,.F.);
#1326=EDGE_LOOP('',(#1320,#1322,#1323,#1325));
#1327=FACE_OUTER_BOUND('',#1326,.F.);
#1328=ADVANCED_FACE('',(#1327),#1319,.F.);
#1329=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.66175E0));
#1330=DIRECTION('',(0.E0,0.E0,1.E0));
#1331=DIRECTION('',(-1.E0,0.E0,0.E0));
#1332=AXIS2_PLACEMENT_3D('',#1329,#1330,#1331);
#1333=CONICAL_SURFACE('',#1332,3.66175E0,4.5E1);
#1334=ORIENTED_EDGE('',*,*,#1104,.F.);
#1335=ORIENTED_EDGE('',*,*,#1324,.T.);
#1337=ORIENTED_EDGE('',*,*,#1336,.T.);
#1338=ORIENTED_EDGE('',*,*,#1321,.F.);
#1339=EDGE_LOOP('',(#1334,#1335,#1337,#1338));
#1340=FACE_OUTER_BOUND('',#1339,.F.);
#1341=ADVANCED_FACE('',(#1340),#1333,.F.);
#1342=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#1343=DIRECTION('',(0.E0,0.E0,-1.E0));
#1344=DIRECTION('',(-1.E0,0.E0,0.E0));
#1345=AXIS2_PLACEMENT_3D('',#1342,#1343,#1344);
#1346=CYLINDRICAL_SURFACE('',#1345,3.3235E0);
#1347=ORIENTED_EDGE('',*,*,#1336,.F.);
#1348=ORIENTED_EDGE('',*,*,#1310,.F.);
#1349=ORIENTED_EDGE('',*,*,#1280,.T.);
#1350=ORIENTED_EDGE('',*,*,#1307,.T.);
#1351=EDGE_LOOP('',(#1347,#1348,#1349,#1350));
#1352=FACE_OUTER_BOUND('',#1351,.F.);
#1353=ADVANCED_FACE('',(#1352),#1346,.F.);
#1354=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,7.662316879053E0));
#1355=DIRECTION('',(0.E0,0.E0,-1.E0));
#1356=DIRECTION('',(0.E0,-1.E0,0.E0));
#1357=AXIS2_PLACEMENT_3D('',#1354,#1355,#1356);
#1358=CONICAL_SURFACE('',#1357,6.577776749733E0,7.E1);
#1359=ORIENTED_EDGE('',*,*,#1261,.T.);
#1360=ORIENTED_EDGE('',*,*,#1250,.T.);
#1361=ORIENTED_EDGE('',*,*,#1184,.F.);
#1363=ORIENTED_EDGE('',*,*,#1362,.F.);
#1365=ORIENTED_EDGE('',*,*,#1364,.F.);
#1366=ORIENTED_EDGE('',*,*,#1245,.F.);
#1367=EDGE_LOOP('',(#1359,#1360,#1361,#1363,#1365,#1366));
#1368=FACE_OUTER_BOUND('',#1367,.F.);
#1369=ADVANCED_FACE('',(#1368),#1358,.T.);
#1370=CARTESIAN_POINT('',(6.5E0,-1.125833024920E1,0.E0));
#1371=DIRECTION('',(1.E0,0.E0,0.E0));
#1372=DIRECTION('',(0.E0,1.E0,0.E0));
#1373=AXIS2_PLACEMENT_3D('',#1370,#1371,#1372);
#1374=PLANE('',#1373);
#1375=ORIENTED_EDGE('',*,*,#1200,.T.);
#1377=ORIENTED_EDGE('',*,*,#1376,.T.);
#1378=ORIENTED_EDGE('',*,*,#1362,.T.);
#1379=ORIENTED_EDGE('',*,*,#1182,.F.);
#1380=EDGE_LOOP('',(#1375,#1377,#1378,#1379));
#1381=FACE_OUTER_BOUND('',#1380,.F.);
#1382=ADVANCED_FACE('',(#1381),#1374,.T.);
#1383=CARTESIAN_POINT('',(0.E0,-1.501110699893E1,0.E0));
#1384=DIRECTION('',(5.E-1,-8.660254037844E-1,0.E0));
#1385=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
#1386=AXIS2_PLACEMENT_3D('',#1383,#1384,#1385);
#1387=PLANE('',#1386);
#1388=ORIENTED_EDGE('',*,*,#1198,.T.);
#1389=ORIENTED_EDGE('',*,*,#1220,.T.);
#1390=ORIENTED_EDGE('',*,*,#1364,.T.);
#1391=ORIENTED_EDGE('',*,*,#1376,.F.);
#1392=EDGE_LOOP('',(#1388,#1389,#1390,#1391));
#1393=FACE_OUTER_BOUND('',#1392,.F.);
#1394=ADVANCED_FACE('',(#1393),#1387,.T.);
#1396=DIRECTION('',(0.E0,0.E0,-1.E0));
#1397=VECTOR('',#1396,8.E0);
#1398=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,8.E0));
#1399=LINE('',#1398,#1397);
#1400=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#1401=DIRECTION('',(0.E0,0.E0,1.E0));
#1402=DIRECTION('',(1.E0,0.E0,0.E0));
#1403=AXIS2_PLACEMENT_3D('',#1400,#1401,#1402);
#1405=DIRECTION('',(0.E0,0.E0,-1.E0));
#1406=VECTOR('',#1405,8.E0);
#1407=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,8.E0));
#1408=LINE('',#1407,#1406);
#1409=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.E0));
#1410=DIRECTION('',(0.E0,0.E0,1.E0));
#1411=DIRECTION('',(-1.E0,0.E0,0.E0));
#1412=AXIS2_PLACEMENT_3D('',#1409,#1410,#1411);
#1414=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#1415=DIRECTION('',(0.E0,0.E0,-1.E0));
#1416=DIRECTION('',(1.E0,0.E0,0.E0));
#1417=AXIS2_PLACEMENT_3D('',#1414,#1415,#1416);
#1419=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#1420=DIRECTION('',(0.E0,0.E0,1.E0));
#1421=DIRECTION('',(1.E0,0.E0,0.E0));
#1422=AXIS2_PLACEMENT_3D('',#1419,#1420,#1421);
#1424=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,8.E0));
#1425=CARTESIAN_POINT('',(4.E0,-7.505553499465E0,0.E0));
#1426=VERTEX_POINT('',#1424);
#1427=VERTEX_POINT('',#1425);
#1428=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,8.E0));
#1429=CARTESIAN_POINT('',(-4.E0,-7.505553499465E0,0.E0));
#1430=VERTEX_POINT('',#1428);
#1431=VERTEX_POINT('',#1429);
#1432=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.4E0));
#1433=DIRECTION('',(0.E0,0.E0,-1.E0));
#1434=DIRECTION('',(1.E0,0.E0,0.E0));
#1435=AXIS2_PLACEMENT_3D('',#1432,#1433,#1434);
#1436=CYLINDRICAL_SURFACE('',#1435,4.E0);
#1438=ORIENTED_EDGE('',*,*,#1437,.F.);
#1440=ORIENTED_EDGE('',*,*,#1439,.T.);
#1442=ORIENTED_EDGE('',*,*,#1441,.T.);
#1444=ORIENTED_EDGE('',*,*,#1443,.F.);
#1445=EDGE_LOOP('',(#1438,#1440,#1442,#1444));
#1446=FACE_OUTER_BOUND('',#1445,.F.);
#1447=ADVANCED_FACE('',(#1446),#1436,.T.);
#1448=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,8.4E0));
#1449=DIRECTION('',(0.E0,0.E0,-1.E0));
#1450=DIRECTION('',(1.E0,0.E0,0.E0));
#1451=AXIS2_PLACEMENT_3D('',#1448,#1449,#1450);
#1452=CYLINDRICAL_SURFACE('',#1451,4.E0);
#1453=ORIENTED_EDGE('',*,*,#1437,.T.);
#1455=ORIENTED_EDGE('',*,*,#1454,.T.);
#1456=ORIENTED_EDGE('',*,*,#1441,.F.);
#1458=ORIENTED_EDGE('',*,*,#1457,.T.);
#1459=EDGE_LOOP('',(#1453,#1455,#1456,#1458));
#1460=FACE_OUTER_BOUND('',#1459,.F.);
#1461=ADVANCED_FACE('',(#1460),#1452,.T.);
#1462=CARTESIAN_POINT('',(0.E0,-7.505553499465E0,0.E0));
#1463=DIRECTION('',(0.E0,0.E0,-1.E0));
#1464=DIRECTION('',(1.E0,0.E0,0.E0));
#1465=AXIS2_PLACEMENT_3D('',#1462,#1463,#1464);
#1466=PLANE('',#1465);
#1467=ORIENTED_EDGE('',*,*,#1454,.F.);
#1468=ORIENTED_EDGE('',*,*,#1443,.T.);
#1469=EDGE_LOOP('',(#1467,#1468));
#1470=FACE_OUTER_BOUND('',#1469,.F.);
#1471=ADVANCED_FACE('',(#1470),#1466,.T.);
#1476=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1478=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1477);
#1479=(CONVERSION_BASED_UNIT('DEGREE',#1478)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1481=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.655193456059E-3),#1475,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1482=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1481))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1475,#1479,#1480))REPRESENTATION_CONTEXT(
'ID3','3'));
#1483=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1484=DIRECTION('',(0.E0,0.E0,1.E0));
#1485=DIRECTION('',(1.E0,0.E0,0.E0));
#1488=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1489=DIRECTION('',(0.E0,0.E0,1.E0));
#1490=DIRECTION('',(1.E0,0.E0,0.E0));
#1493=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1494=DIRECTION('',(0.E0,0.E0,1.E0));
#1495=DIRECTION('',(1.E0,0.E0,0.E0));
#1498=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1497,#1487);
#1499=SHAPE_REPRESENTATION_RELATIONSHIP('','',#1497,#1492);
#1500=DESIGN_CONTEXT('',#478,'design');
#1501=MECHANICAL_CONTEXT('',#478,'mechanical');
#1502=PRODUCT('SPEZAM8','SPEZAM8','NOT SPECIFIED',(#1501));
#1503=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('22','LAST_VERSION',
#1502,.MADE.);
#1509=CARTESIAN_POINT('',(2.E1,0.E0,-2.499444650053E1));
#1510=DIRECTION('',(1.E0,0.E0,0.E0));
#1511=DIRECTION('',(0.E0,1.E0,0.E0));
#1512=AXIS2_PLACEMENT_3D('',#1509,#1510,#1511);
#1513=ITEM_DEFINED_TRANSFORMATION('','',#1496,#1512);
#1514=(REPRESENTATION_RELATIONSHIP('','',#1497,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1513)SHAPE_REPRESENTATION_RELATIONSHIP());
#1515=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1514,#1508);
#1518=CARTESIAN_POINT('',(2.E1,3.25E1,7.505553499465E0));
#1519=DIRECTION('',(1.E0,0.E0,0.E0));
#1520=DIRECTION('',(0.E0,1.E0,0.E0));
#1521=AXIS2_PLACEMENT_3D('',#1518,#1519,#1520);
#1522=ITEM_DEFINED_TRANSFORMATION('','',#1496,#1521);
#1523=(REPRESENTATION_RELATIONSHIP('','',#1497,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1522)SHAPE_REPRESENTATION_RELATIONSHIP());
#1524=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1523,#1517);
#1527=CARTESIAN_POINT('',(2.E1,0.E0,4.000555349947E1));
#1528=DIRECTION('',(1.E0,0.E0,0.E0));
#1529=DIRECTION('',(0.E0,1.E0,0.E0));
#1530=AXIS2_PLACEMENT_3D('',#1527,#1528,#1529);
#1531=ITEM_DEFINED_TRANSFORMATION('','',#1496,#1530);
#1532=(REPRESENTATION_RELATIONSHIP('','',#1497,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1531)SHAPE_REPRESENTATION_RELATIONSHIP());
#1533=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1532,#1526);
#1536=CARTESIAN_POINT('',(2.E1,-3.25E1,7.505553499465E0));
#1537=DIRECTION('',(1.E0,0.E0,0.E0));
#1538=DIRECTION('',(0.E0,1.E0,0.E0));
#1539=AXIS2_PLACEMENT_3D('',#1536,#1537,#1538);
#1540=ITEM_DEFINED_TRANSFORMATION('','',#1496,#1539);
#1541=(REPRESENTATION_RELATIONSHIP('','',#1497,#489)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1540)SHAPE_REPRESENTATION_RELATIONSHIP());
#1542=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1541,#1535);
#1544=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1546=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1545);
#1547=(CONVERSION_BASED_UNIT('DEGREE',#1546)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1549=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-2),#1543,'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1550=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1549))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1543,#1547,#1548))REPRESENTATION_CONTEXT(
'ID4','3'));
#1551=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1552=DIRECTION('',(0.E0,0.E0,1.E0));
#1553=DIRECTION('',(1.E0,0.E0,0.E0));
#1555=MECHANICAL_CONTEXT('',#478,'mechanical');
#1556=PRODUCT('AP040_ASM','AP040_ASM','NOT SPECIFIED',(#1555));
#1557=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('128','LAST_VERSION',
#1556,.MADE.);
#1559=PRODUCT_CATEGORY('part','');
#1560=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1556));
#1561=PRODUCT_CATEGORY_RELATIONSHIP('','',#1559,#1560);
#1562=PRODUCT_CATEGORY('part','');
#1563=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#482,#701,#1502));
#1564=PRODUCT_CATEGORY_RELATIONSHIP('','',#1562,#1563);
#1565=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#1566=SECURITY_CLASSIFICATION('','',#1565);
#1567=CC_DESIGN_SECURITY_CLASSIFICATION(#1566,(#483,#702,#1503,#1557,#490,#706,
#715,#724,#733,#1507,#1516,#1525,#1534));
#1568=APPROVAL_STATUS('approved');
#1569=APPROVAL(#1568,'');
#1570=CC_DESIGN_APPROVAL(#1569,(#1566,#483,#702,#1503,#1557,#484,#703,#1504,
#1558));
#1571=CALENDAR_DATE(122,27,10);
#1572=COORDINATED_UNIVERSAL_TIME_OFFSET(2,0,.AHEAD.);
#1573=LOCAL_TIME(11,25,1.9E1,#1572);
#1574=DATE_AND_TIME(#1571,#1573);
#1575=APPROVAL_DATE_TIME(#1574,#1569);
#1576=DATE_TIME_ROLE('creation_date');
#1577=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1574,#1576,(#484,#703,#1504,#1558));
#1578=DATE_TIME_ROLE('classification_date');
#1579=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#1574,#1578,(#1566));
#1580=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#1581=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#1582=PERSON_AND_ORGANIZATION(#1580,#1581);
#1583=APPROVAL_ROLE('approver');
#1584=APPROVAL_PERSON_ORGANIZATION(#1582,#1569,#1583);
#1585=PERSON_AND_ORGANIZATION_ROLE('creator');
#1586=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1582,#1585,(#483,#702,#1503,
#1557,#484,#703,#1504,#1558));
#1587=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#1588=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1582,#1587,(#483,#702,#1503,
#1557));
#1589=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#1590=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1582,#1589,(#1566));
#1591=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#1592=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#1582,#1591,(#1556,#482,#701,
#1502));
#5=CIRCLE('',#4,4.75E1);
#10=CIRCLE('',#9,4.75E1);
#15=CIRCLE('',#14,4.E0);
#20=CIRCLE('',#19,4.E0);
#25=CIRCLE('',#24,4.E0);
#30=CIRCLE('',#29,4.E0);
#35=CIRCLE('',#34,4.E0);
#40=CIRCLE('',#39,4.E0);
#45=CIRCLE('',#44,4.E0);
#50=CIRCLE('',#49,4.E0);
#63=CIRCLE('',#62,4.75E1);
#68=CIRCLE('',#67,4.75E1);
#73=CIRCLE('',#72,4.5E1);
#78=CIRCLE('',#77,4.5E1);
#83=CIRCLE('',#82,4.5E1);
#96=CIRCLE('',#95,4.5E1);
#101=CIRCLE('',#100,4.E0);
#106=CIRCLE('',#105,4.E0);
#111=CIRCLE('',#110,4.E0);
#116=CIRCLE('',#115,4.E0);
#121=CIRCLE('',#120,4.E0);
#126=CIRCLE('',#125,4.E0);
#131=CIRCLE('',#130,4.E0);
#136=CIRCLE('',#135,4.E0);
#222=EDGE_CURVE('',#176,#184,#5,.T.);
#224=EDGE_CURVE('',#176,#184,#10,.T.);
#228=EDGE_CURVE('',#187,#188,#15,.T.);
#230=EDGE_CURVE('',#188,#187,#20,.T.);
#234=EDGE_CURVE('',#195,#196,#25,.T.);
#236=EDGE_CURVE('',#196,#195,#30,.T.);
#240=EDGE_CURVE('',#203,#204,#35,.T.);
#242=EDGE_CURVE('',#204,#203,#40,.T.);
#246=EDGE_CURVE('',#211,#212,#45,.T.);
#248=EDGE_CURVE('',#212,#211,#50,.T.);
#258=EDGE_CURVE('',#175,#176,#54,.T.);
#261=EDGE_CURVE('',#183,#184,#58,.T.);
#263=EDGE_CURVE('',#175,#183,#63,.T.);
#274=EDGE_CURVE('',#175,#183,#68,.T.);
#290=EDGE_CURVE('',#172,#180,#73,.T.);
#292=EDGE_CURVE('',#172,#180,#78,.T.);
#302=EDGE_CURVE('',#171,#172,#87,.T.);
#304=EDGE_CURVE('',#171,#179,#83,.T.);
#306=EDGE_CURVE('',#179,#180,#91,.T.);
#320=EDGE_CURVE('',#171,#179,#96,.T.);
#334=EDGE_CURVE('',#191,#192,#101,.T.);
#336=EDGE_CURVE('',#192,#191,#106,.T.);
#340=EDGE_CURVE('',#199,#200,#111,.T.);
#342=EDGE_CURVE('',#200,#199,#116,.T.);
#346=EDGE_CURVE('',#207,#208,#121,.T.);
#348=EDGE_CURVE('',#208,#207,#126,.T.);
#352=EDGE_CURVE('',#215,#216,#131,.T.);
#354=EDGE_CURVE('',#216,#215,#136,.T.);
#365=EDGE_CURVE('',#191,#187,#140,.T.);
#368=EDGE_CURVE('',#192,#188,#144,.T.);
#391=EDGE_CURVE('',#199,#195,#148,.T.);
#394=EDGE_CURVE('',#200,#196,#152,.T.);
#417=EDGE_CURVE('',#207,#203,#156,.T.);
#420=EDGE_CURVE('',#208,#204,#160,.T.);
#443=EDGE_CURVE('',#215,#211,#164,.T.);
#446=EDGE_CURVE('',#216,#212,#168,.T.);
#463=CLOSED_SHELL('',(#252,#267,#280,#296,#311,#324,#358,#372,#384,#398,#410,
#424,#436,#450,#462));
#464=MANIFOLD_SOLID_BREP('',#463);
#465=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#467=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#470=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#476=AXIS2_PLACEMENT_3D('',#473,#474,#475);
#477=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#476,#464),#472);
#484=PRODUCT_DEFINITION('design','',#483,#480);
#485=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR AP040-PLATTE.',#484);
#486=SHAPE_DEFINITION_REPRESENTATION(#485,#477);
#487=SHAPE_DEFINITION_REPRESENTATION(#488,#489);
#488=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR AP040_ASM.',#1558);
#489=SHAPE_REPRESENTATION('',(#495,#711,#720,#729,#738,#1512,#1521,#1530,#1539,
#1554),#1550);
#490=NEXT_ASSEMBLY_USAGE_OCCURRENCE('63','Next assembly relationship',
'AP040-PLATTE',#1558,#484,$);
#491=PRODUCT_DEFINITION_SHAPE('Placement #63',
'Placement of AP040-PLATTE with respect to AP040_ASM',#490);
#503=CIRCLE('',#502,2.999911164155E0);
#508=CIRCLE('',#507,2.999911164155E0);
#521=CIRCLE('',#520,4.E0);
#526=CIRCLE('',#525,4.E0);
#539=CIRCLE('',#538,2.999911164155E0);
#544=CIRCLE('',#543,2.999911164155E0);
#553=CIRCLE('',#552,4.E0);
#558=CIRCLE('',#557,4.E0);
#584=EDGE_CURVE('',#573,#574,#503,.T.);
#586=EDGE_CURVE('',#574,#573,#508,.T.);
#597=EDGE_CURVE('',#574,#578,#516,.T.);
#599=EDGE_CURVE('',#577,#578,#558,.T.);
#601=EDGE_CURVE('',#573,#577,#512,.T.);
#613=EDGE_CURVE('',#578,#577,#526,.T.);
#624=EDGE_CURVE('',#570,#569,#521,.T.);
#626=EDGE_CURVE('',#578,#569,#562,.T.);
#629=EDGE_CURVE('',#577,#570,#530,.T.);
#639=EDGE_CURVE('',#566,#565,#544,.T.);
#641=EDGE_CURVE('',#565,#569,#548,.T.);
#644=EDGE_CURVE('',#566,#570,#534,.T.);
#654=EDGE_CURVE('',#565,#566,#539,.T.);
#667=EDGE_CURVE('',#569,#570,#553,.T.);
#685=CLOSED_SHELL('',(#590,#605,#618,#633,#648,#659,#672,#684));
#686=MANIFOLD_SOLID_BREP('',#685);
#687=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#689=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#692=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#698=AXIS2_PLACEMENT_3D('',#695,#696,#697);
#699=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#698,#686),#694);
#703=PRODUCT_DEFINITION('design','',#702,#480);
#704=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR AP040-BOLZEN.',#703);
#705=SHAPE_DEFINITION_REPRESENTATION(#704,#699);
#706=NEXT_ASSEMBLY_USAGE_OCCURRENCE('64','Next assembly relationship',
'AP040-BOLZEN',#1558,#703,$);
#707=PRODUCT_DEFINITION_SHAPE('Placement #64',
'Placement of AP040-BOLZEN with respect to AP040_ASM',#706);
#715=NEXT_ASSEMBLY_USAGE_OCCURRENCE('65','Next assembly relationship',
'AP040-BOLZEN',#1558,#703,$);
#716=PRODUCT_DEFINITION_SHAPE('Placement #65',
'Placement of AP040-BOLZEN with respect to AP040_ASM',#715);
#724=NEXT_ASSEMBLY_USAGE_OCCURRENCE('66','Next assembly relationship',
'AP040-BOLZEN',#1558,#703,$);
#725=PRODUCT_DEFINITION_SHAPE('Placement #66',
'Placement of AP040-BOLZEN with respect to AP040_ASM',#724);
#733=NEXT_ASSEMBLY_USAGE_OCCURRENCE('67','Next assembly relationship',
'AP040-BOLZEN',#1558,#703,$);
#734=PRODUCT_DEFINITION_SHAPE('Placement #67',
'Placement of AP040-BOLZEN with respect to AP040_ASM',#733);
#747=CIRCLE('',#746,8.95E0);
#760=CIRCLE('',#759,8.95E0);
#769=CIRCLE('',#768,8.95E0);
#786=B_SPLINE_CURVE_WITH_KNOTS('',3,(#774,#775,#776,#777,#778,#779,#780,#781,
#782,#783,#784,#785),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#803=B_SPLINE_CURVE_WITH_KNOTS('',3,(#791,#792,#793,#794,#795,#796,#797,#798,
#799,#800,#801,#802),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#812=B_SPLINE_CURVE_WITH_KNOTS('',3,(#804,#805,#806,#807,#808,#809,#810,#811),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#829=B_SPLINE_CURVE_WITH_KNOTS('',3,(#817,#818,#819,#820,#821,#822,#823,#824,
#825,#826,#827,#828),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#838=B_SPLINE_CURVE_WITH_KNOTS('',3,(#830,#831,#832,#833,#834,#835,#836,#837),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#843=CIRCLE('',#842,8.95E0);
#852=B_SPLINE_CURVE_WITH_KNOTS('',3,(#844,#845,#846,#847,#848,#849,#850,#851),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#861=B_SPLINE_CURVE_WITH_KNOTS('',3,(#853,#854,#855,#856,#857,#858,#859,#860),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,4),(0.E0,2.E-1,4.E-1,6.E-1,8.E-1,1.E0),
.UNSPECIFIED.);
#878=B_SPLINE_CURVE_WITH_KNOTS('',3,(#866,#867,#868,#869,#870,#871,#872,#873,
#874,#875,#876,#877),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#891=B_SPLINE_CURVE_WITH_KNOTS('',3,(#879,#880,#881,#882,#883,#884,#885,#886,
#887,#888,#889,#890),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#908=B_SPLINE_CURVE_WITH_KNOTS('',3,(#896,#897,#898,#899,#900,#901,#902,#903,
#904,#905,#906,#907),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#913=CIRCLE('',#912,5.65E0);
#918=CIRCLE('',#917,5.65E0);
#923=CIRCLE('',#922,4.E0);
#932=CIRCLE('',#931,3.3235E0);
#941=CIRCLE('',#940,4.E0);
#946=CIRCLE('',#945,3.3235E0);
#955=CIRCLE('',#954,4.E0);
#960=CIRCLE('',#959,3.3235E0);
#965=CIRCLE('',#964,4.E0);
#974=CIRCLE('',#973,3.3235E0);
#1003=B_SPLINE_CURVE_WITH_KNOTS('',3,(#991,#992,#993,#994,#995,#996,#997,#998,
#999,#1000,#1001,#1002),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),(0.E0,
1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#1020=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1008,#1009,#1010,#1011,#1012,#1013,#1014,
#1015,#1016,#1017,#1018,#1019),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),
(0.E0,1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#1033=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1021,#1022,#1023,#1024,#1025,#1026,#1027,
#1028,#1029,#1030,#1031,#1032),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),
(0.E0,1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#1050=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1038,#1039,#1040,#1041,#1042,#1043,#1044,
#1045,#1046,#1047,#1048,#1049),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,4),
(0.E0,1.111111111111E-1,2.222222222222E-1,3.333333333333E-1,4.444444444444E-1,
5.555555555556E-1,6.666666666667E-1,7.777777777778E-1,8.888888888889E-1,1.E0),
.UNSPECIFIED.);
#1098=EDGE_CURVE('',#1063,#1067,#747,.T.);
#1100=EDGE_CURVE('',#1063,#1067,#760,.T.);
#1104=EDGE_CURVE('',#1088,#1087,#965,.T.);
#1106=EDGE_CURVE('',#1087,#1088,#955,.T.);
#1116=EDGE_CURVE('',#1063,#1064,#751,.T.);
#1119=EDGE_CURVE('',#1067,#1068,#755,.T.);
#1121=EDGE_CURVE('',#1064,#1068,#843,.T.);
#1132=EDGE_CURVE('',#1064,#1068,#769,.T.);
#1144=EDGE_CURVE('',#1069,#1070,#786,.T.);
#1146=EDGE_CURVE('',#1071,#1069,#891,.T.);
#1148=EDGE_CURVE('',#1073,#1071,#861,.T.);
#1150=EDGE_CURVE('',#1068,#1073,#764,.T.);
#1153=EDGE_CURVE('',#1064,#1076,#773,.T.);
#1155=EDGE_CURVE('',#1070,#1076,#838,.T.);
#1166=EDGE_CURVE('',#1070,#1055,#790,.T.);
#1168=EDGE_CURVE('',#1055,#1056,#803,.T.);
#1170=EDGE_CURVE('',#1069,#1056,#895,.T.);
#1180=EDGE_CURVE('',#1076,#1075,#812,.T.);
#1182=EDGE_CURVE('',#1075,#1060,#816,.T.);
#1184=EDGE_CURVE('',#1060,#1055,#829,.T.);
#1196=EDGE_CURVE('',#1072,#1073,#852,.T.);
#1198=EDGE_CURVE('',#1074,#1072,#1033,.T.);
#1200=EDGE_CURVE('',#1075,#1074,#1003,.T.);
#1216=EDGE_CURVE('',#1071,#1057,#865,.T.);
#1218=EDGE_CURVE('',#1057,#1058,#878,.T.);
#1220=EDGE_CURVE('',#1072,#1058,#1037,.T.);
#1232=EDGE_CURVE('',#1056,#1057,#908,.T.);
#1243=EDGE_CURVE('',#1053,#1054,#913,.T.);
#1245=EDGE_CURVE('',#1054,#1058,#990,.T.);
#1250=EDGE_CURVE('',#1053,#1055,#986,.T.);
#1261=EDGE_CURVE('',#1054,#1053,#918,.T.);
#1265=EDGE_CURVE('',#1080,#1079,#923,.T.);
#1267=EDGE_CURVE('',#1079,#1080,#941,.T.);
#1278=EDGE_CURVE('',#1079,#1083,#927,.T.);
#1280=EDGE_CURVE('',#1084,#1083,#932,.T.);
#1282=EDGE_CURVE('',#1080,#1084,#936,.T.);
#1294=EDGE_CURVE('',#1083,#1084,#946,.T.);
#1305=EDGE_CURVE('',#1091,#1092,#960,.T.);
#1307=EDGE_CURVE('',#1083,#1091,#950,.T.);
#1310=EDGE_CURVE('',#1084,#1092,#982,.T.);
#1321=EDGE_CURVE('',#1087,#1091,#978,.T.);
#1324=EDGE_CURVE('',#1088,#1092,#969,.T.);
#1336=EDGE_CURVE('',#1092,#1091,#974,.T.);
#1362=EDGE_CURVE('',#1059,#1060,#1020,.T.);
#1364=EDGE_CURVE('',#1058,#1059,#1050,.T.);
#1376=EDGE_CURVE('',#1074,#1059,#1007,.T.);
#1395=CLOSED_SHELL('',(#1110,#1125,#1138,#1159,#1174,#1190,#1208,#1224,#1237,
#1254,#1271,#1286,#1299,#1314,#1328,#1341,#1353,#1369,#1382,#1394));
#1404=CIRCLE('',#1403,4.E0);
#1413=CIRCLE('',#1412,4.E0);
#1418=CIRCLE('',#1417,4.E0);
#1423=CIRCLE('',#1422,4.E0);
#1437=EDGE_CURVE('',#1426,#1427,#1399,.T.);
#1439=EDGE_CURVE('',#1426,#1430,#1404,.T.);
#1441=EDGE_CURVE('',#1430,#1431,#1408,.T.);
#1443=EDGE_CURVE('',#1427,#1431,#1423,.T.);
#1454=EDGE_CURVE('',#1427,#1431,#1418,.T.);
#1457=EDGE_CURVE('',#1430,#1426,#1413,.T.);
#1472=OPEN_SHELL('',(#1447,#1461,#1471));
#1473=MANIFOLD_SOLID_BREP('',#1395);
#1474=SHELL_BASED_SURFACE_MODEL('',(#1472));
#1475=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1477=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1480=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1486=AXIS2_PLACEMENT_3D('',#1483,#1484,#1485);
#1487=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1486,#1473),#1482);
#1491=AXIS2_PLACEMENT_3D('',#1488,#1489,#1490);
#1492=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#1491,#1474),#1482);
#1496=AXIS2_PLACEMENT_3D('',#1493,#1494,#1495);
#1497=SHAPE_REPRESENTATION('',(#1496),#1482);
#1504=PRODUCT_DEFINITION('design','',#1503,#1500);
#1505=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR SPEZAM8.',#1504);
#1506=SHAPE_DEFINITION_REPRESENTATION(#1505,#1497);
#1507=NEXT_ASSEMBLY_USAGE_OCCURRENCE('68','Next assembly relationship',
'SPEZAM8',#1558,#1504,$);
#1508=PRODUCT_DEFINITION_SHAPE('Placement #68',
'Placement of SPEZAM8 with respect to AP040_ASM',#1507);
#1516=NEXT_ASSEMBLY_USAGE_OCCURRENCE('69','Next assembly relationship',
'SPEZAM8',#1558,#1504,$);
#1517=PRODUCT_DEFINITION_SHAPE('Placement #69',
'Placement of SPEZAM8 with respect to AP040_ASM',#1516);
#1525=NEXT_ASSEMBLY_USAGE_OCCURRENCE('70','Next assembly relationship',
'SPEZAM8',#1558,#1504,$);
#1526=PRODUCT_DEFINITION_SHAPE('Placement #70',
'Placement of SPEZAM8 with respect to AP040_ASM',#1525);
#1534=NEXT_ASSEMBLY_USAGE_OCCURRENCE('71','Next assembly relationship',
'SPEZAM8',#1558,#1504,$);
#1535=PRODUCT_DEFINITION_SHAPE('Placement #71',
'Placement of SPEZAM8 with respect to AP040_ASM',#1534);
#1543=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1545=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1548=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1554=AXIS2_PLACEMENT_3D('',#1551,#1552,#1553);
#1558=PRODUCT_DEFINITION('design','',#1557,#1500);
ENDSEC;
END-ISO-10303-21;